video corpo
cad

Duetta®

Duetta®

Product catalog summary
Technical Specifications Overview
This document provides the technical specifications for the Duetta® Heated Soak models. It includes key dimensions, installation instructions, and electrical requirements.
Key Dimensions
  • Overall dimensions are nominal with a tolerance of +0 and -0.25 inches (6mm).
  • Drain Location: Center Drain
  • Pump Location: Right Hand Pump
  • Drop-in Cutout Dimensions vary by model, with templates provided for each.
  • Total Weight ranges from 994 lbs (451 kg) to 1265 lbs (574 kg) depending on the model.
  • Floor Loading is approximately 58-59 lb/ft² (283-290 kg/m²).
  • Product Weight - Empty ranges from 86 lbs (39 kg) to 115 lbs (52 kg).
  • Operating Gallons (Max) range from 79 gal (299 Liters) to 108 gal (408.8 Liters).
  • Soaking Depth is 17.5 inches (444.5 mm).
Model Specific Dimensions
  • Outer Length varies from 60 inches (1524 mm) to 72 inches (1829 mm).
  • Outer Width varies from 36 inches (914 mm) to 42 inches (1067 mm).
  • Overall Height is 26 inches (660 mm).
  • Overflow Height is 17.9 inches (445 mm).
  • Interior Dimensions (top of bath) and (bottom of bath) vary by model.
  • Interior Depth at Drain End is 21.25 inches (540 mm).
  • Backrest Angle is 20°.
Electrical Requirements
  • Each component requires a separate, dedicated GFCI protected circuit.
  • Motor/Heater and Motor/Heater with Chromatherapy require 120V/15A outlets.
Installation Instructions
  • Refer to the installation instructions included with the fixture before beginning installation.
  • Confirm product availability and specifications before commencing with any installation work.
Additional Information
  • Product specifications and availability are subject to change without notice.
  • For additional information, contact Customer Service at 800-288-4002 or visit www.jacuzzi.com/baths/support/specs-and-manuals/.
See more

Catalog excerpts

Duetta®-1

Technical Specifications Duetta® Technical Specifications for Heated Soak Letter Each component requires a seperate, dedicated GFCI protected circuit KEY DIMENSIONS* [NOTE: The overall dimensions are nominal with a tolerance of +0 and -.25" (6mm).] *Right hand model shown. Left hand model is exact opposite. Refer to installation instructions included with fixture before beginning installation. Please confirm product availability and specifications before commencing with any installation work. PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE ©2017 Jacuzzi Luxury Bath • For additional information call Customer Service 800-288-4002 • www.jacuzzi.com/baths/support/specs-and-manuals/ QB49000 www.iacuzzi.com

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.