Warewashing Systems Standard Features • Adjustable Rinse System • Rainbow Rinse™ with arched rinse arm design • 19-3/4" (502 mm) clearance • WISR® Cleaning System • Double-wall insulated doors retain heat, keeping wash water hot & generating less heat in the dish room • Self-cleaning wash arms • 22" pre-wash • Fully automatic, including auto-fill • Adjustable vent cowl collars • Exclusive EnergyGuard™ controls Self-draining stainless steel wash pump Digital LED control panel Strike plate table limit switch Large front access for ease of maintenance Stainless steel strainer pans Splash shields Stainless steel frame and legs Exhaust vent fan control 15kW wash tank heater Front dress panel Adjustable bullet feet RackStar® 66 Mandatory Specs Specify: □ Electric □ Steam Specify Voltage Specify Sanitizing Method: □ High Temperature □ Chemical Sanitizing Specify Direction of Operation: □ Left to Right □ Right to Left Options D Higher than Standard Chamber Height D Onboard Booster □ 40° F (22.2° C) Rise □ 70° F (38.9° C) Rise D Single Point Connection with Onboard Booster D Steam Booster Heater D 23" (584 mm) Unhooded Side Loader D 30" (762 mm) Unhooded Side Loader D 1/2" Pressure Regulator D Flanged Feet D Prison Package Accessories D 36-Compartment Rack □ 4-1/8" tall (104 mm) □ 5 - 5/8" tall (143 mm) □ 7" tall (178 mm) D Combination Rack D Peg Rack D Sheet Pan Rack D Drain Water Tempering Kit* D Scaltrol D Water Hammer Arrestor *Requires separate electrical connection Specifications Uses 0.35 gallons of water (1.32 liters) per rack in Econo Rinse mode Uses 0.52 gallons of water (1.97 liters) per rack in Turbo Rinse mode Cleans 223 racks per hour 22" (559 mm) pre-wash section has 3 upper and 1 lower pre-wash arms Durable stainless steel construction

RackStar® 66 A - Electrical Connection B - Main Water Inlet - High Hood Option All dimensions from the floor can be increased 1 3/4” using the machine’s adjustable feet. - Open Door (No Booster or Supplied from Steam Booster)) C - Drain Connection (1 1/2" NPT) D - Vent Connections (Including Dampers) E - Steam Connection (3/4" NPT) Items in red are not supplied with the machine. Items in blue are for the Steam option. A Primary Electrical Opening (Provided on both ends of machine.) Secondary Electrical Opening (Provided on both ends of machine.) Single-point (Option): uses only primary opening...

RackStar® 66 Right to Left A - Electrical Connection B - Main Water Inlet - Open Door - High Hood Option All dimensions from the floor can be increased 1 3/4” using the machine’s adjustable feet. (No Booster or Supplied from Steam Booster)) C - Drain Connection (1 1/2" NPT) D - Vent Connections (Including Dampers) E - Steam Connection (3/4" NPT) Items in red are not supplied with the machine. Items in blue are for the Steam option. Primary Electrical Opening (Provided on both ends of machine.) Secondary Electrical Opening (Provided on both ends of machine.) Single-point (Option): uses only primary...

Warewashing Systems ELECTRICAL REQUIREMENTS - DUAL POINT CONNECTION Power Supply Total Load Minimum Circuit Ampacity Maximum Overcurrent Protection WITH 18kW/70° RISE ONBOARD BOOSTER