1. Catalogs
  2. Jackson
  3. PT-10 Potwasher Pass-Through Potwasher

PT-10 Potwasher Pass-Through Potwasher

PT-10 Potwasher   Pass-Through Potwasher

PT-10 Potwasher Pass-Through Potwasher

Product catalog summary
Performance and Capacities:
The potwasher uses 6.5 gallons of water per cycle and can perform 12 cycles per hour. It features a fully automatic cycle lasting 260 seconds, with an internally mounted electric booster heater capable of a minimum 60°F temperature rise to achieve the required 180°F sanitizing rinse temperature. The unit includes a 9 KW heating element in a 9.5-gallon rinse tank, two rotating wash arms, and stationary rinse nozzles. The wash tank has a 30-gallon capacity.
Construction and Features:
Made from 12 & 14 gauge stainless steel, the potwasher includes electromechanical controls with a safety door switch, temperature control thermostat, and low water protection. Operational features include high-pressure stainless steel wash arms, a double filtration system, and waterproof LED digital gauges. Installation features include an accessible stainless steel control panel and adjustable bullet feet.
Operating Specifications:
The unit operates at a minimum wash temperature of 150°F and a rinse temperature of 180°F. It has three wash cycles: light (260 seconds), medium (380 seconds), and heavy (500 seconds). The frame dimensions are 33 inches wide, 43 inches deep, and 84.5 inches high, with a shipping weight of 1050 lbs.
Electrical and Gas Requirements:
The wash pump motor has a horsepower of 7.5. Full load amps vary by voltage: 71.0 at 208V, 65.2 at 230V, and 33.6 at 460V. Gas requirements include a 1/2 NPT connection with a BTU of 36,000 for both natural gas and propane.
Water and Steam Requirements:
The minimum inlet water temperature is 140°F, with a flow pressure of 15-25 PSI. The unit uses 78 gallons of water per hour and has a minimum waterline size of 1/2 inch IPS. Steam requirements include a 3/4 NPT connection with injectors and coils consuming 15 and 33 lbs per hour, respectively.
Certifications:
The unit is NSF Certified and UL Listed, manufactured by LVO Manufacturing Inc.
See more

Catalog excerpts

PT-10 Potwasher   Pass-Through Potwasher-1

Performance/Capacities Potwashers • Water usage — 6.5 gallons per cycle • 12 cycles per hour • Fully automatic cycle - 260 seconds • Incoming water pressure regulator • Internally mounted electric booster heater - Capable of minimum 60°F temperature rise for required 180°F minimum sanitizing rinse temperature • One (1) 9 KW Heating Element in a 9 1/2 gallon rinse tank • Two (2) Rotating Wash Arms - 1 upper & 1 lower • Stationary Rinse Nozzles - Top & Bottom • 30 Gallon Wash Tank • Electromechanical controls - Safety door switch - Temperature control thermostat and low water protection • Construction - 12 & 14 gauge stainless steel • Operational and cleanability features - High pressure, all stainless steel wash arms - 28 3/4” wide x 30 1/2” high door opening - Double filtration system - Externally mounted spray down hose with spray gun nozzle -Waterproof LED ditigal gauges - Three wash cycles • Installation features - Stainless steel control panel - easily accessible - Adjustable bullet feet - Detergent/rinse additive signal connection fuse box Standard Features Operating Capacity Racks per Hour 12 Operating Cycle (Seconds) Light Wash Time 180 Dwell Time 20 Rinse Time 60 Total Cycle 260 Medium Wash Time 300 Dwell Time 20 Rinse Time 60 Total Cycle 380 Heavy Wash Time 420 Dwell Time 20 Rinse Time 60 Total Cycle 500 Operating Temperatures Wash — °F (Minimum) 150 Rinse — °F (Minimum) 180 Frame Dimensions (Inches) Width 33 Depth 43 (45 gas) Height 84 1/2 Height (door open) Electric 103 1/2 Gas 106 Wall Clearanse (Minimum) 16 Wall Clearance (Control Panel Side) 36 Wall Clearance (Back) 12 Shipping Weight (Lbs.) 1050 Shipping Size (Inches) Width 42 Depth 60 Height 90 Electrical Rating Wash Pump Motor Horsepower 7.5 Full Load Amps 208V 230V 460V Electric 71.0 65.2 33.6 Steam Injectors 46.0 42.6 22.3 Steam Coils 22.0 20.0 11.0 Gas 46.0 42.6 22.3 Gas Requirements Gas Connection (NPT) 1/2 Natural Gas (Inches-water column) Minimum inlet 6.0 Main Manifold 3 1/2 BTU 36,000 Propane (Inches-water column) Minimum inlet 11.0 Main Manifold 6.0 BTU 36,000 3” Stainless steel chimney on back of machine Steam Requirements Steam connection (NPT) 3/4 Injectors (Lbs per hour) 15 Coils (Lbs per hour) 33 Water Requirements Inlet Temperature (Minimum) 140°F Gallons per Hour 78 Gallons per Rack 6.5 Waterline Size IPS (Minimum) (Inches) 1/2 Drainline Size IPS (Minimum) (Inches) 1 1/2 Flow Pressure (PSI) 15-25 Power/Connections PT-10

 Open the catalog to page 1
PT-10 Potwasher   Pass-Through Potwasher-2

Potwashers www.jacksonmsc.com 1-888-800-5672 Short Form Specifications Item No. _______________ Unit shall be LVO/Jackson* PT-10 Pass Through door style hot water sanitizing pot & pan washer. Electrical characteristics to be ____ volts / 60 cycles / ___ phase operation with a 260 second automatic cycle using 78 gallons of 180° F. final rinse water per hour. Stainless steel construction to include hood, frame, wash tank, and adjustable feet. A 7.5 HP motor mounted to a pump with a impeller shall be mounted to the machine frame. As standard the unit shall include: • Single point connections for...

 Open the catalog to page 2

Archived catalogs

  1. Avenger HT

    2  Pages

  2. Avenger LT

    2  Pages

  3. Delta 5

    2  Pages

  4. Delta 1200

    2  Pages

  5. TempStar

    2  Pages

  6. Conserver XL2

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.