1. Catalogs
  2. Jackson
  3. Model 10 Round Door-Type High-Temp - Electric

Model 10 Round Door-Type High-Temp - Electric

Model 10 Round Door-Type   High-Temp - Electric

Model 10 Round Door-Type High-Temp - Electric

Product catalog summary
Specifications Overview
The document outlines the specifications and features of the M10 series dishwashers, including models M10A, M10AB, and M10APRB. Each model has distinct features and optional accessories.

Standard Features
  • Automatic and manual controls
  • Incoming water pressure regulator
  • Exclusive counter rotating wash arms
  • 17 1/2” diameter round racks
  • Uses 1.28 gallons (4.8 liters) of water per rack
  • 45 racks per hour with a 72-second total automatic cycle
  • Right side mounted control box
  • Requires connection to a 180°F (82.2°C) minimum potable water source for sanitizing rinse
  • Electric wash tank heat with low water protection

Optional Features
  • 50 Hz Cycle (Not UL listed)
  • Five inches higher than standard hood
  • Four inches (100 mm) shorter than standard hood
  • Left hand control box
  • Nine inches (230 mm) shorter standard legs

Model-Specific Features
  • Model 10AB: Includes a 6.5 KW built-in booster heater to raise incoming water temperature by 50˚F (10˚C) and maintain proper sanitizing temperature. Requires a 140˚F (60˚C) minimum potable water source.
  • Model 10APRB: Includes all features of the 10AB plus a 1/2 HP pump for proper flow pressure during the rinse cycle, suitable for areas with low or fluctuating water pressure. Requires a 140˚F (60˚C) minimum potable water source.

Dimensions and Electrical Requirements
  • Model 10AB: Height 57-1/2” (1416 mm), Width 27-1/2” (699 mm), Depth 22-5/8” (575 mm), Weight 200 lbs (91 kg)
  • Electrical requirements vary by model, with service breaker sizes ranging from 15A to 60A depending on the model and voltage.

Performance Capabilities
  • Flow Pressure: 15-25 PSI
  • Wash Pump Motor Horsepower: 1/2
  • Rinse Pump Motor Horsepower (10APRB Only): 1/2
  • Pump Capacity: 70 GPM
  • Waterline Size IPS (Minimum): 1/2 inch
  • Drainline Size IPS (Minimum): 1 1/2 inch

Water Requirements
  • Model 10A: Inlet temperature 180°F (82.2˚C), Wash operating temperature 150°F (65.6˚C), Rinse operating temperature 180°F (82.2˚C)
  • Models 10AB and 10APRB: Inlet temperature 140°F (60˚C), Wash operating temperature 150°F (65.6˚C), Rinse operating temperature 180°F (82.2˚C)

Contact Information
For further details, contact Jackson MSC at their Barbourville, KY location via phone or email.
See more

Catalog excerpts

Model 10 Round Door-Type   High-Temp - Electric-1

Specifications Standard Features M10A M10AB M10APRB Models M10 Round Project Item Quantity CSI Section 11400 Approval Date Optional Features 50 Hz Cycle (Not UL listed) Five inches higher than standard hood Four inches (100 mm) shorter than standard hood Left hand control box Nine inches (230 mm) shorter standard legs Accessory Items Automatic and manual controls Incoming water pressure regulator Exclusive counter rotating wash arms 17 1/2” diameter round racks 1 - Dish 1 - Glass and Silver 1 - Four Compartment Silver • • • • Four compartment silver basket) Combination Rack Peg Rack Scaltrol Highway 25E P. O. Box 1060 Barbourville, KY 40906 Tel: 606-523-9795 Tel: 1-888-800-5672 Fax: 606-523-9196 E-mail: [email protected] www.jacksonmsc.com 07610-002-66-65B (01/07) Uses 1.28 gallons (4.8 liters) of water per rack 45 racks per hour 72 - second total automatic cycle W ash time - 60 sec. R inse time - 10 sec. D ry time - 2 sec. Right side mounted control box Must be connected to a 180°F (82.2¢ªC) minimum potable water source for sanitizing rinse External vacuum breaker Electric wash tank heat with low water protection Round design distributes even wash Model10AB • All the same features as the 10A plus a 6.5 KW built-in booster heater to raise incoming water 50¢ªF (10¢ªC) and is thermostatically controlled to maintain proper sanitizing temperature. Must be connected to a 140¢ªF (60¢ªC) minimum potable water source.¢ª Model 10APRB • All the same features as the 10AB plus a 1/2 HP pump to ensure proper flow pressure during the rinse cycle. Designed for areas of low or fluctuating water pressure and is recommended for facilities on well water systems or where slow pressure is below 15 PSI. Must be connected to a 140¢ªF (60¢ªC) minimum potable water

 Open the catalog to page 1
Model 10 Round Door-Type   High-Temp - Electric-2

We reserve the right to change specifications appearing in this bulletin without incurring any obligation for equipment previously or subsequently sold. M10 Highway 25E P. O. Box 1060 Barbourville, KY 40906 Tel: 606-523-9795 Tel: 1-888-800-5672 Fax: 606-523-9196 E-mail: [email protected] www.jacksonmsc.com 07610-002-66-65B (01/07) model no. sisi z e Draiain height s hippiippiippiipping info didi m ensisions height wididth DEPTHTH weight c lassassass c ube height wididth d epth 10AB 57-1/2” (1416 mm) 27-1/2” (699 mm) 22-5/8” (575 mm) 20-1/2” (521 mm) 200 lbs (91 kg) 92.5 58.5 cu. ft. 73” (1854...

 Open the catalog to page 2

Archived catalogs

  1. Avenger HT

    2  Pages

  2. Avenger LT

    2  Pages

  3. Delta 5

    2  Pages

  4. Delta 1200

    2  Pages

  5. TempStar

    2  Pages

  6. Conserver XL2

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.