Warewashing Systems DishStar® HT-E-SEER DishStar® HT-E-SEER Models DishStar HT-E-SEER Standard Features • Steam Elimination • Energy Recovery System collects the hot water vapor inside the machine and uses it to preheat the incoming rinse water • Operates on a single cold water connection • Built-in booster heater with Sani-Sure™ final rinse system • Automatic tank fill • Push button start • Door interlock • Pressure regulator • Water hammer arrestor • Solid state controls • Digital LED display • Delime cycle • Labyrinth type door design • Automatic pumped drain for floor and wall drain installations • Stainless steel wash pump • Door switch • Built-in chemical pumps and priming switches • One (1) each peg and combination rack included Mandatory Specs Specify voltage_ Options □ Back Panel □ Drain Water Tempering Kit □ Scale Prevention System (SPS) □ Replacement Cartridge for SPS □ Casters (adds 3/4" to height) □ Tie Down Accessories □ 36-Compartment Rack □ 4-1/8" tall (105 mm) □ 5-5/8" tall (143 mm) □ 7" tall (178 mm) □ Combination Rack □ Peg Rack □ Machine Stand □ 6" (152 mm) high □ 18" (457 mm) high Specifications • High temperature undercounter dishwasher with steam elimination and energy recovery • Operates on a single cold water connection Air insulated between body and stainless steel housing Durable stainless steel construction • Uses 0.65 gallons (2.46 liters) of water per rack • Cleans 24 (20)* racks per hour • Three selectable cycles: Normal - 145 seconds Heavy - 213 seconds Extra-Heavy - 313 seconds • Powerful 1 hp wash pump motor 1-year parts and labor warranty NOTE: A vent hood is not recommended above the Jackson DishStar HT-E-SEER as it does not produce excessive vapors. Always check with the local building code to know what type of ventilation is required for commercial dishmachine installations in your area. Intertek Racks per hour calculated with NSFsuggested load time of thirty (30) seconds for front opening type

DishStar® HT-E-SEER LEGEND A - Electrical Connection B - Water Inlet (with 5' hose) (3/4" Male GHT, connect to true 1/2” ID line, 40-90 °F) C - Drain Hose (5/8" ID, install into 1-1/2” MIN drain with Air-gap) D - Chemical Port All dimensions from the floor can be Increased V using the machine’s adjustable feet. Optional casters add 3/4’ to height of unit. Jackson WWS, Inc. Shipping Address: 6209 North U.S. Highway 25E, Gray, KY 40734 Mailing Address: P.O. Box 1060, Barbourville, KY 40906 Telephone: 888-800-5672 • Fax: 606-523-1799 Email: [email protected] 07610-004-54-39 [01/21/21]