Project Item Quantity CSI Section 11400 Approval AJX Vision Series Date Models AJX-54 AJX-76 (AJX-54 plus 22” pre-wash) AJX-90 (AJX-54 plus 36” pre-wash) Standard Features • 25” standard clearance • Stainless steel strainer pans and accommodates larger wares, scrap bucket such as sheet pans, mixing bowls, etc. • Splash shields • Exclusive “Energy Guard” controls • Strikeplate table-limit switch •• Externally operated drain lever • Incoming water-pressure regulator • Adjustable bullet feet • Electromechanical controls • Stainless steel frame and legs • Adjust-A-PeakTM adjustable conveyor • Exhaust vent fan control speed allows machine to extend wash • 18kw wash tank heater time and rinse contact for heavy soil conditions • Self-draining stainless steel wash pump • Front dress panel Specify booster heater size: Mandatory Specs Accessories 40¢ªF (4¢ªC) Rise (18kW) or Specify tank heat: 36 Compartment rack 4-1/8” tall 70¢ªF (21¢ªC) Rise (30kW) Electric Steam (105 mm), 5-5/8” tall (143 mm), Voltage (specify)________________ Optional Features 7” tall (178 mm) Combination rack 23” (584 mm) Unhooded side loader Peg rack Specify model type: 23” (584 mm) Hooded side loader Sheet pan rack High temperature with Energy Star® indicator to adjust conveyor speed 30” (762 mm) Unhooded side loader Chemical sanitizing with Energy Star® Drain quench system 30” (762 mm) Hooded side loader indicator to adjust conveyor speed Scaltrol Flanged feet Steam booster heater Specify direction of operation: Blower dryer Water hammer arrestor Left to right or Right to left Vent cowl collars (set of 2)Prison package Low Hood with15kW tank heater Specifications High-temperature model uses 0.68 gallons 8” (203 mm) splash shields (2.57 liters) per rack. Chemical-sanitizing on both wash and rinse ends model uses 0.78 gallons (2.95 liters) per rack Standard 25” (635 mm) chamber height High-temperature model cleans 225 racks clearance accommodates larger wares per hour. Chemical-sanitizing model cleans 209 racks per hour 18” (457 mm) wash section with an 18” (457 mm) separation AJX-76: 22” (559 mm) pre-wash section has between wash and rinse 2 upper and 1 lower pre-wash arms Stainless steel construction AJX-90: 36” (915 mm) pre-wash section has 3 upper and 2 lower pre-wash arms Conveyors SHIPPING ADDRESS MAILING ADDRESS Tel: 606-523-9795 www.jacksonmsc.com 6209NorthU.S.Highway25E P. O. Box 1060 Tel: 1-888-800-5672 E-mail: [email protected] Gray, KY 40734 Barbourville, KY 40906 Fax: 606-523-1799 07610-003-68-07 (04/09)

AJX-54 Vision Series - Electric Left to Right Left to Right High Hood Recommended Table Fabrication Note: Low Hood dimensions are in bold italics 4 1/2 [114mm] Rack Rail 14 [355mm] Minimum Table A - Machine water inlet 1/2" NPT, Legend B 180°F Hi-temp,140°F Low-temp 25 [635mm] minimum 21 [533mm] Rack Rail Height Use Silicone Sealer B - Electrical connection Above Dishtable Between Table and C - Drain connection 1-1/2" NPT Lip of Machine to 1/4" (6mm) - 5/16" (8mm)D - Vent collar - Optional Prevent Leakage E - Vent cowl standard 54 [1372mm] 8 [203mm] Scrap Tub Table to Table Trough Note: All vertical...

AJX-54 Vision Series - Electric Right to Left Right to Left High Hood Recommended Table Fabrication Note: Low Hood dimensions are in bold italics A 4 1/2 [114mm] Rack Rail Table A - Machine water inlet 1/2" NPT, Legend B 180°F Hi-temp,140°F Low-temp21 [533mm] minimum 25 [635mm]Use Silicone Sealer Rack Rail Height Between Table and B - Electrical connection Above Dishtable Lip of Machine to C - Drain connection 1-1/2" NPT 1/4" (6mm) - 5/16" (8mm) Prevent Leakage D - Vent collar - Optional E - Vent cowl standard 54 [1372mm] 8 [203mm]Tub Table to Table Note: Tub Will Accept Note: All vertical dimensions...

AJX-76 Vision Series - Electric Left to Right Left to Right High Hood Note: Low Hood dimensions are in bold italics LegendA - Machine water inlet 1/2" NPT, 180°F Hi-temp,140°F Low-temp minimum B - Electrical connection C - Drain connection 1-1/2" NPT D - Vent collar - Optional E - Vent cowl standard F - Prewash water inlet 3/4" NPT 110°F-140°F G - Cold water thermostat plumbing connection 3/4" NPT - Optional Note: All vertical dimensions are +/- 1/2" from floor due to adjustable bullet feet. 84 [2134mm] 73 [1854mm] With Doors Open 6621 [1692mm] 59 21 [1511mm] A 1 [25mm] F 3 [79mm] G 21 [15mm]...

AJX-76 Vision Series - Electric Right to Left Right to Left High Hood Recommended Table Fabrication Note: Tub Will Accepta Table Flange Note: Low Hood dimensions are in bold italics Rack Rail Up to 24 7/8" Table Legend (632 mm) A - Machine water inlet 1/2" NPT, 180°F Use Silicone Sealer Hi-temp,140°F Low-temp minimum 3/4" (19 mm) Between Table and B - Electrical connection Rack Rail Height Table Turndown Lip of Machine to 21" (533 mm) C - Drain connection 1-1/2" NPT Above Dishtable Tub Flange 3/4" Max Prevent LeakageD - Vent collar - Optional 1/4" (6mm) - 5/16" (8mm)E - Vent cowl standardF -...

AJX-90 Vision Series - Electric Left to Right Recommended Table Fabrication Note: Tub Will Accept a Table Flange Rack Rail Left to Right High Hood Up to 24 7/8" Table (632 mm) Note: Low Hood dimensions are in bold italics Use Silicone Sealer Legend 3/4" (19 mm) Between Table and A - Machine water inlet 1/2" NPT, 180°FRack Rail Height Table Turndown 21" (533 mm) Lip of Machine to Hi-temp,140°F Low-temp minimum Above Dishtable Tub Flange 3/4" Max Prevent LeakageB - Electrical connection 1/4" (6mm) - 5/16" (8mm) C - Drain connection 1-1/2" NPT D - Vent collar - Optional E - Vent cowl standard F...

AJX-90 Vision Series - Electric Right to Left Right to Left High Hood Recommended Table Fabrication Note: Tub Will Accept Note: Low Hood dimensions are in bold italics a Table Flange Rack Rail Up to 24 7/8" Legend Table (632 mm) A - Machine water inlet 1/2" NPT, 180°F Hi-temp,140°F Low-temp minimum Use Silicone Sealer B - Electrical connection 3/4" (19 mm) Between Table and C - Drain connection 1-1/2" NPT Rack Rail Height Lip of Machine to Table Turndown 21" (533 mm)Above Dishtable Tub Flange 3/4" Max D - Vent collar - Optional Prevent Leakage1/4" (6mm) - 5/16" (8mm) E - Vent cowl standard F...