Insulation panel with internal ventilation system Izodom 2000 Polska The insulation panel with internal ventilation system is a product of Izodom 2000 Polska, intended for the thermal renovation of existing buildings. Thanks to the use of innovative solutions developed by Izodom 2000 Polska, by applying insulation panels with internal ventilation system, we simultaneously obtain two effects: insulation of the existing building and continuous, durable drying of the insulated wall. As a result of the migration of condensate coming from the wall and travelling along a system of internal vertical and horizontal channels, in the final stage the moisture evaporates into the atmosphere via the installed "mini-grating" ventilation system. Panels are attached in a traditional way, by means of adhesive and plastic wall plugs with collars. The wall plugs affix the panel by means of a special collar in its upper right-hand edge. This collar is covered by successive erected panels, preventing formation of thermal bridges. Each panel is produced in an individual mould. Thus both the geometry of the panel and the ideal smoothness of all surfaces provide an excellent join between neighbouring panels, prevent gaps and the insulation surface obtained is exceptionally smooth and even. There is no need to sand the external surface of the panels. Our product range includes panels made of traditional, white EPS and grey Neopor. These materials are produced by BASF. They feature a very low heat transfer coefficient and are resistant to biological corrosion. Insulation carried out using IZOBETA may be finished with a thin-coat plaster or façade tiles. Panels will soon be available with a readymade finish in the form of a rustic effect. Advantages of our insulation panels with internal ventilation system: 1. Possibility of insulating even very damp walls - the walls will be continuously dried, even after the airtight insulation is executed; 2. Continuity of the created insulation – obtained thanks to panels being connected by a double "tongue and groove"; 3. No thermal bridges - ensured by the special structure of panels, with plastic wall plugs with collars inside the insulation; 4. Repeatability of dimensions and shapes – thus their erection and fitting are simple and quick; 5. Smooth and non-absorbent surface of panels - guaranteeing exceptionally long life; 6. Ease and simplicity of erection ensured by the unique construction of our panels. Insulation panel with internal ventilation system 8 x 100 x 56,7 [cm] Insulation panel with internal ventilation system 12 x 100 x 56,7 [cm] Any moisture gathering inside runs out via a network of channels to the outside of the wall, from where it can evaporate into the atmosphere. At the same time, the special structure of panels prevents formation of thermal bridges and effectively insulates the building. Thermal conductivity coefficient All insulation panels with internal ventilation system can be made of EPS or NEOPOR. The insulating capability of both materials is illustrated by the above graph. They are available in two thicknesses: 8 and 12 cm. More information concerning our products may be obtained from our representative, our offices at the web site: www.izodom2000polska.com

How to arrange insulation panels with internal ventilation system? Stage 1 Affix the strip intended for panels with a thickness of 8 or 12 cm depending on the thickness of insulation adopted. Stage 2 In the panels intended to be erected in the first bottom row of insulation one should remove the lower "tongue" [diagram 1] Stage 3 Erection of the first row of panels should be commenced by cutting the first panel [diagram 2]. We attach the panel with adhesive and 3-4 wall plugs affixed to the collar in the upper right-hand side of the panel. We erect the panels from left to right, in each successive...