GENERAL CATALOGUE
122Pages

GENERAL CATALOGUE Range of waterproofing and insulation materials for the building industry

TPO MEMBRANES LOGICROOF P LOGICROOF LOGICROOF LOGICROOF LOGICROOF LOGICROOF LOGICROOF LOGICROOF LOGICROOF

TECHNONICOL ITALIA

TECHNONICOL Italia GENERAL INFORMATION Italiana Membrane, established in 1988, is one of the main producers of waterproofing construction materials in Italy. The constant technological development of the manufacturing lines has allowed Italiana Membrane to extend its range of products. At the end of 2013 Italiana Membrane plant became a part of the TECHNONICOL Corporation. The corporate has more than 50 000 customers between organizations and individuals spread out over Russia, Europe and CIS. The company produces bitumen modified waterproofing membranes, APP SBS and POE, self-adhesive...

TECHNONICOL Italia GENERAL INFORMATION PRODUCTION IMPROVEMENT The wide range of materials and production capacity of the Italiana Membrane plant allows TECHNONICOL to improve and expand its presence in Europe and the Mediterranean countries. Since 2004, Italiana Membrane is committed to continuous improvement of pollution prevention and environmental protection, which is also the main aim of TECHNONICOL Corporation.  All plants of the Corporation are subjected to state environmental appraisal at their design stage. The inside and outside environment at our industrial sites is monitored...

TECHNONICOL Italia GENERAL INFORMATION RESEARCH AND DEVELOPMENT TECHNONICOL owns 6 scientific and research centers that perform tests for all the companies of the group . The research activities of laboratories and research centers aimed at the study and prevention of the causes of aging materials, expanding the operating temperature range of roofing materials, increase the range of their application. The main activities of the laboratories and Research Centers are:  Creating of the new roofing, waterproofing and heat insulation materials;  Tests on: heat, microscopic and other analysis,...

POLYMER-BITUMEN MEMBRANES POLYMER-BITUMEN MEMBRANES

GENERAL INFORMATION Roof coverings during their service life undergo the effects of many unfavourable factors from the external environment. Changes in the surrounding temperature cause deformations in both the roofing material and the base on which it is installed. The ability to withstand such deformations is the most important characteristic of roofing material and this depends on the raw materials used in the manufacturing process. SURFACE FINISHING  SLATE The mineral slate chips are used to protect the polymer-bitumen membrane from UV rays. Standard colors include natural grey, red,...

Polymer-bitumen membranes GENERAL INFORMATION 1. The surface must be cleaned of dust, debris, grease, leaves and should not have gaps and cracks or other irregularities. Surface must be treated with primer before installation of waterproofing or insulating material. 2. During installation, material and support must be heated by torch, on all width of the roll. Additionally the area of the overlapping must be heated. During proper installation material sticks to the support and on the lap should show a bid of bitumen. 3. On multi-layer systems, following layers must be applied fully bonded...

GENERAL INFORMATION SINGLE-PLY MEMBRANE UNDERLAY MEMBRANE BALLASTED ROOF BALLASTED ROOF Waterproofing of shopping centers, industrial or any other buildings where it is important to get the quick result. Installation of singlelayer membrane takes much less time than double-layer system. The top layer of a double-layer roof cladding. Is used for waterproofing of the flat roof of residential, public or industrial buildings. The bottom layer of a double-layer roof cladding. Is used for waterproofing of the flat roof of residential, public or industrial buildings. ROOT RESISTANT. UNDERTILE...

SBS - BITUMEN MEMBRANES POLYMER-BITUMEN MEMBRANES

Polymer-bitumen membranes SCUDOELAST P25 is a premium SBS modIfied bitumen membrane reinforced with heavy duty non woven spunbond polyester fabric stabilized with fiberglass. The high elasticity and cold flexibility of SBS bitumen compound grant a very good adhesion to support. SCUDOELAST P25 MINERAL - with mineral slate finish is used as single layer or top layer of roof cladding on new constructions and also for renewal. INSTALLATION Torch-on application REACTION TO FIRE CLASS E UPPER SURFACE LOWER SURFACE SCUDOELAST P4 is a premium SBS modified bitumen membrane, reinforced with non woven...

Polymer-bitumen membranes INSTALLATION Torch-on application REACTION TO FIRE CLASS E THICKNESS WEIGHT UPPER SURFACE LOWER SURFACE SCUDOELAST FCTR 180 MINERAL POLYMER-BITUMEN MEMBRANES SCUDOELAST FCTR 180 - Premium SBS modified bitumen membrane, reinforced with non woven spunbond polyester. Bottom layer of roof cladding, for waterproofing of engineering structures. Can be used for the installation as two-layer of foundation waterproofing. SCUDOELAST FCTR 180 MINERAL - Top layer of roof cladding on buildings and constructions. Mineral slate finish.

Polymer-bitumen membranes GAMMAELAST P is a high quality SBS (styrene butadiene styrene) polymer bitumen modified membrane, reinforced with non woven spunbond polyester fabric stabilized with fiberglass mat. Thanks to its exceptionally high intrinsic characteristics, it is used for the waterproofing of residential, commercial and industrial buildings, whether insulated or not, (tensile structures, metal profile decks and similar). Due to its excellent cold fl exibility, it is also used in case of cold climates. GAMMAELAST P MINERAL used as top layer on prefab structures, residential and...

Polymer-bitumen membranes INSTALLATION Torch-on application REACTION TO FIRE CLASS E THICKNESS WEIGHT UPPER SURFACE LOWER SURFACE POLYMER-BITUMEN MEMBRANES ECOELAST P is a SBS (styrene butadiene styrene) polymer bitumen modified membrane, reinforced with polyester fabric stabilized with fiberglass mat. ECOELAST P can be used as underlayer on various roof types, whether they are insulated or not, under heavy protection or on foundations. ECOELAST P MINERAL used as top layer on residential and industrial buildings. Mineral slates finish. BETAGUM P is a SBS (Styrene Butadiene Styrene) polymer...