ISOVER CLIMPIPE Section Alu2
2Pages

Product Data Sheet Application: HVAC CLIMPIPE Section Alu2 HVAC - thermal insulation for pipework Designed to provide thermal and acoustic insulation of pipework, CLIMPIPE Sections are strong, lightweight pre-formed ‘snap on’ sections with a reinforced aluminium foil facing and a self-adhesive overlap to help ensure a strong vapour barrier. Manufactured in 1.2m lengths, the glass mineral wool pipe sections offer the opportunity for fewer joints than traditional 1m products, helping to reduce thermal bridging. Features and Benefits Thermal performance Fire Classification The foil faced CLIMPIPE Sections help to meet thermal building regulations and offer energy savings. The consistent density and concentric positioning of the bore of Isover sections provide consistent thermal performance along the length of the pipe. CLIMPIPE Section Alu 2 has a Euroclass A2 Reaction to Fire classification, according to BS EN 13501-1. Acoustic performance Recycled glass Due to the natural sound wave damping effect that glass mineral wool possesses, noise levels from waste water pipes services can be reduced with CLIMPIPE Sections. Manufactured from up to 70% recycled glass. Product Specification Nominal Insulation Thickness (mm) Thermal Conductivity Mean temp °C

Product Data Sheet Application: HVAC CHARACTERISTICS Characteristic Euroclass A2L-s1, d0 Reaction to Fire classification, according to BS EN 13501-1. Service temperature Suitable for continuous service temperatures from 5°C to 500°C. The temperature on the aluminium facing should not exceed 80°C. When using the product for the insulation of pipework with a surface temperature below dew point, care must be taken to ensure a 100% vapour barrier is maintained. Fulfils the demands in ASTM C795-08 (Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel)...