*myarchiexpo

Catalogs
ISOSYSTEM
Termosystem EPS G

Termosystem EPS G

Product catalog summary

Technical Specifications Overview

1. Dimensional Tolerances
- Length, Width, and Thickness: Tolerances are ±2mm for length and width, and ±1mm for thickness, as per EN 822.
- Perpendicularity and Planarity: Perpendicularity tolerance is ≤2 mm/m (EN 824) and planarity tolerance is ±5 mm (EN 825).

2. Thermal and Water Properties
- Thermal Conductivity: 0.031 W/mK at 10°C (EN 12939).
- Water Absorption: ≤2% (EN 12087).

3. Mechanical Properties
- Compression Resistance: ≥150 Kpa (EN 826).
- Bend Resistance: ≥200 Kpa (EN 12089).

4. Fire and Temperature Performance
- Fire Performance: Euroclass E (EN 13501/1).
- Operational Temperature Limit: 75°C.

5. Water Vapour Transfer
- MU: 70-90 (EN 12086).

6. Glass Coating Features
- Shape Stability: ≥110°C (EN 1110:1999).
- Flexibility: -5°C (EN 1109:1999).
- Dimensional Stability: ±0.3% longitudinal and transverse (EN 1107-1:1999).
- Water Resistance: >60 Kpa (EN 1928/B:2000).

7. Tensile and Tear Resistance
- Tensile Strength: Longitudinal 500 N50/mm, Transverse 350 N50/mm (EN 12311-1:1999).
- Tear Resistance: Longitudinal and Transverse 100 N (EN 12310-1:1999).

8. Sintered Expanded Polystyrene with Graphite
- Compliance: EN 13163 with delayed fire spreading, Euroclass "E".
- Insulation Thicknesses: Range from 20mm to 200mm.
- Thermal Transmittance: Varies with thickness, e.g., 1.03 W/m2k at 30mm to 0.25 W/m2k at 120mm.

9. Important Notices
- Users must ensure product suitability for specific applications in compliance with current legislation and standards.
- ISOSYSTEM SRL reserves the right to modify or terminate production without notice.

Catalog excerpts

A system made up of the coupling of sheathing and a sintered expanded polystyrene insulation panel with graphite additive in compliance with Standard EN 13163 with delayed fire spreading, Euroclass "E" Insulation thicknesses: mm 20-30-40-50-60-70-80-100-120-130-140-150-200 SINTERED EXPANDED POLYSTYRENE WITH GRAPHITE TECHNICAL SPECIFICATIONS BEFORE COUPLING FEATURE Length tolerance Width tolerance Thickness tolerance Perpendicularity tolerance Planarity tolerance Water absorption Bend resistance Fire performance Operational temperature limit Water vapour transfer GLASS COATING Shape stability in presence of heat Flexibility when cool Dimensional stability Longitudinal Longitudinal maximum load Transverse maximum load Water resistance Tensile strength Tear resistance Longitudinal Fire resistance Genuine thermal transmittance calculated based upon genuine thermal conductivity (U= W/m2k) ISOSYSTEM SRL Via dell’Artigianato, 25 - Ponte di Piave - Treviso - Italy Tel. +39 0422 858070 - Fax +39 0422 759654 www.termoisolanti.com - [email protected] WARNINGS: The information which features in the present technical specifications, provides a general description of the product. It remains however the role and responsibility of the user to check that the product and relative documentation are suited to the particular application in compliance with legislation and standards currently in force. ISOSYSTEM Srl reserves the right to, at an any moment and without forewarning, make any type of modification, including termination of production. Supply is based upon our production capacity.

Open the catalog to page 1

Termosystem EPS G

Termosystem EPS G

Catalog excerpts

All ISOSYSTEM catalogs and technical brochures

Archived catalogs