INSULATING DESIGN

Isocappotto Wall cladding solutions

SANDWICH PANEL FASTENING 5 CHOOSING THE RIGHT PANEL 7 TECHNICAL SOLUTIONS COMPARISON 11

Isocappotto solution The ISOCAPPOTTO technological system for walls is exclusive to Isopan. Thanks to this solution, Isopan can provide its customers with a system which is quick and easy to install and provides the insulating capacity typical of sandwich panels, together with the high levels of performance and appearance offered by traditional exterior insulation and finish systems. DESCRIPTION The ISOCAPPOTTO system can be described as a kind of false cladding, in that it is different to other traditional systems for standard walls in its use of a double metal skin sandwich panel coated in...

SANDWICH PANEL FASTENING The sandwich panels are attached to the underlying structure by special screws of varying length depending on the thickness of the panel selected. These are supplied with special panel securing plates. Load bearing structure Isocappotto Cladding Screw with plate Wall panel Metal profile for securing panel to the structure ATTENTION: for correct use of the components mentioned in the description of the installation stages, please refer to the following pages in this document or contact the Isopan Technical Department. The arrangement of the fasteners may vary depending...

Installation STEP 1 Give the wall to be plastered a uniform coat of PRIMER. Then, before the primer has dried, position strip mesh reinforcement along the wall panel joins. STEP 2 Once the strip mesh reinforcement has been positioned cover with a coat of PRIMER. This ensures immediate fixing of the strip mesh reinforcement mesh and stops it from moving around during the following steps. STEP 3 Once the PRIMER has been given, apply a uniform and even layer of ISOPAN INTONACO. This product must be applied in various coats, one after the other until the ideal plaster thickness has been achieved....

mineral wool wall panel POLYURETHANE WALL PANEL CHARACTERISTICS Double sheet, self-supporting, polyurethane insulated metal panel. The join is interlocking and visible. The number and position of fasteners must guarantee resistance to the stress and deformation induced by thermal dilation. Double sheet, self-supporting, mineral wool insulated panel made using a layer of exclusive insulating material made up of strips offset in a longitudinal direction, the fibres of which are laid at 90° in relation to the surface of the two skins. In the event of a fire, this panel contains fire propagation...

Components: Primer Primer made from a blend of synthetic resins, special bitumen and quartz filler. The paste thus obtained, once dry, is characterized by optimum elasticity, adhesion to the substrate and waterproofing. HOW TO USE The surface of the wall panels to be coated with the ISOCAPPOTTO system must be thoroughly cleaned before the product is applied, to ensure there are no elements of non-adhesion (dust, oil, etc.). The product is ready to use and only needs mixing. It is applied as it comes, with no dilution. Take care to create a smooth, uniform finish. It can be applied with a fine...

Premixed plaster made with lime, cement, selected aggregates and additives which ensure excellent workability and breathability. A smooth and uniform application of the product is essential for obtaining a quality finish. Remove any flaking or non-solid material, oil, dust and dirt in general. ISOPAN INTONACO plaster is a ready to use product, simply add 18% clean water (4.5 litres of water per 25 kg bag of product). It must be applied within one hour of being mixed in one or more coats, until the best thickness has been achieved. Plastering operations do not require any special precautions other...

Components: Finitura Ready to use decorative coating made from synthetic resins in a water-based emulsion, coloured oxides, top quality quartz aggregates and additives which improve the workability of the product. The adoption of lightand alkali-resistant pigments guarantees colour stability even when exposed to weather and solar radiation. The coating is also characterized by high elasticity and adhesion to substrates. HOW TO USE The product is ready to use. It must be mixed carefully to obtain a homogenous mass. It must be applied in a single coat with a spatula. For finishing, use a smooth...

STANDARD WALL WITH ISOCAPPOTTO 60 mm The values provided are purely indicative and are obtained thanks to software calculation using standard elements and values.

EN - Edition n.6- 08/2016 Copyright © - ISOPAN S.p.A. SALES COMPANIES REGISTERED AND ADMINISTRATIVE HQ Via Augusto Righi 7 37135 Verona | Italy T. +39 045 8088911 ISOPAN IBERICA Terragona | Spain T. +34 977 52 45 46 ISOPAN RUS Volgogradskaya oblast’ | Russia T. +7 8443 21 20 30 ISOPAN FRANCE Mérignac | France T. +33 5 56021352 ISOPAN EST Popești Leordeni | Romania T. +40 21 3051 600 ISOCINDU Guanajuato | Mexico T. +52 1 472 800 7241 ISOPAN MANNI GROUP CZ Praha | Czech Republic [email protected] ISOPAN SPA Verona | Italy T. +39 045 7359111 ISOPAN DEUTSCHLAND GmbH OT Plötz | Germany...