PRODUCTS and DATA SHEETS

Industrial Sloping Roof Designing a roof is a crucial moment in the development of a new building. FORTELIA offers products and solutions developed to obtain the maximum performance with regard to the world of prefabrication and off-site construction. The geometry of the crosssection provides FORTELIA products with high performance in terms of stiffness and resistance to loads. Thanks to these factors, it is possible to create roofs made of prefabricated monolithic elements, thereby reducing the load-bearing structure texture and ensuring high design flexibility. This results in easier construction...

Polyurethane roofing application Fortelia TECHNICAL FEATURES Roof Performance COUPLING DETAIL EXTERNAL FACING Material Prepainted steel metal sheet Minimum Thickness Maximum Thickness INTERNAL FACING Material Prepainted steel metal sheet Minimum Thickness Maximum Thickness FASTENING Self-drilling screw; with Ø19mm metal washer. Number and position POLYURETAHNE FOAM INSULATION Type of fastenings must be evaluated by Designer.

Broof Broof t2 (PU) - Broof t1 t2 t3 (PIR) Above load values are characteristics, therefore they must be compared with specific project loads before applying safety factors*. Self-weight of the panels is already considered. Linear interpolation may be used to establish in-between span values The calculation has been performed in accordance with the Annex E of EN 14509:2013 standard, without including thermal loads. Maximum allowed deformation in the span: L /200 External Metal sheet thickness: 0,5 mm Internal Metal sheet thickness: 0,5 mm *The graphs and values above are to be considered indicative...

Flat Roof Application Thanks to Fortelia, the load-bearing properties of the roof increase up to 50% more than a roof made with traditional prefabricated sandwich panels. A flat roof is a construction solution that has a great architectural and functional impact. Making use of the outdoor space above the roof has become very important in recent years, both with regard to the individual building, but above all with regard to the urban context into which it fits. FORTELIA offers innovative solutions for the world of flat roofs, making the most of the performance characteristics of the geometric...

Choose your FORTELIA FLAT ROOF PVC FORTELIA FLAT ROOF TPO With FORTELIA FLAT ROOF you can enjoy the patented system of pre-coupling between the sheet and synthetic PVC OR TPO membrane: • Quick installation; • Adhesion of the membrane to the metal sheet; • Mechanical and foot traffic resistance of the surface membrane; • Resistance to water infiltrations; • No risk of interstitial humidity between sheet and membrane FORTELIA FLAT ROOF DEK Thanks to the flat and smooth external metal layer, FORTELIA FLAT ROOF DEK allow the onsite installation of Synthetich Membrane.

Flat Roof with Single metal sheet FORTELIA SYNTH Panel designed for the construction of flat or low-slope roofs, featuring excellent waterproofing properties and, at the same time, high thermal insulation values. It is a panel with corrugated metal sheet on the internal side and a synthetic membrane (in PVC or TPO) on the outside. Insulation with polyurethane foam. Panel Nominal Thickness mm 60

Polyurethane flat roof application Fortelia TECHNICAL FEATURES Flat Roof Pvc/Tpo COUPLING DETAIL EXTERNAL FACING Material Prepainted steel metal sheet with Synthetic Layer Synthetic Coating Metal Thickness INTERNAL FACING Material Prepainted steel metal sheet Minimum Thickness Maximum Thickness FASTENING Self-drilling screw; with Metal Plate 82x40mm Type-F and Pontage strip. POLYURETAHNE FOAM INSULATION Type Number and position of fastenings must be evaluated by Designer.

PANEL SECTION External metal sheet With Synthetic Layer (PVC or TPO) LOAD SPAN PERFORMANCE Above load values are characteristics, therefore they must be compared with specific project loads before applying safety factors1. Self-weight of the panels is already considered. Linear interpolation may be used to establish in-between span values The calculation has been performed in accordance with the Annex E of EN 14509:2013 standard, without including thermal loads. Maximum allowed deformation in the span: L /200 External Metal sheet thickness: 0,8 mm Internal Metal sheet thickness: 0,8 mm The graphs...

Polyurethane flat roof application Fortelia TECHNICAL FEATURES COUPLING DETAIL EXTERNAL FACING Material Prepainted steel metal sheet Minimum Thickness Maximum Thickness INTERNAL FACING Material Prepainted steel metal sheet Minimum Thickness Maximum Thickness FASTENING On-site Membrane Self-drilling screw; with Metal Plate 82x40mm Type-F and Pontage strip. POLYURETAHNE FOAM INSULATION Type Number and position of fastenings must be evaluated by Designer.

External metal sheet LOAD SPAN PERFORMANCE Above load values are characteristics, therefore they must be compared with specific project loads before applying safety factors1. Self-weight of the panels is already considered. Linear interpolation may be used to establish in-between span values The calculation has been performed in accordance with the Annex E of EN 14509:2013 standard, without including thermal loads. Maximum allowed deformation in the span: L /200 External Metal sheet thickness: 0,8 mm Internal Metal sheet thickness: 0,8 mm The graphs and values above are to be considered indicative...

Wall Application Discover the best metal claddings with durability guarantees of up to 40 years The architectural expression is expressed greatest in the façades of buildings, and the geometric modularity, material composition and performance are the main identifying features. The solutions of the FORTELIA range are characterised by the research into flexibility of use and freedom of design. The conformation of FORTELIA products enables configuration of a product that can meet any performance and aesthetic requirements. The attention to production standards, controlling the supply chain and the...