Catalogs >
ISOMAT S.A. >
Technical Datasheet UNI-PRIMER

Technical Datasheet UNI-PRIMER
1Pages

Catalog excerpts

Technical Datasheet Consumption Polymer emulsion which stabilizes porous substrates and ensures the proper adhesion of water-based paints, tile adhesives, flexible mortars, brushable elastomeric coatings, etc. By penetrating inside the pores of the substrate, it acts as a bonding layer between the substrate and the paint, adhesive, mortar, coating, etc. to be applied. UNI-PRIMER is a ready-to-use primer, suitable for ensuring the adhesion of water-based paints on porous substrates made of concrete, masonry, render, gypsum boards, chip boards, etc. It stabilizes weak or crumbling renders, etc. It is also used for stabilizing and reducing the water absorption of surfaces formed by gypsum boards or chip boards, on which tile adhesives, AQUAMAT-ELASTIC (two-component, elastic sealing slurry) or ISOMAT SL 17 (brushable, elastomeric liquid membrane for waterproofing under tiles), are going to be applied. It is suitable for indoor and outdoor applications. Form: emulsion Color: white Density: 1.00 kg/l 100-200 g/m2, depending on the absorptivity of the substrate. UNI-PRIMER is available in plastic containers of 1 kg, 5 kg and 20 kg. 24 months from production date, if stored in original, unopened packaging, at temperatures between +5oC and +35oC. Protect from direct sun exposure and frost. Temperature during application should be at least +5oC. According to the Directive 2004/42/CE (Annex II, table A), the maximum allowed VOC content for the product subcategory h, type WB is 30 g/l (2010) for the ready-to-use product. The ready-to-use product UNI-PRIMER contains a maximum of 30 g/l VOC. ISOMAT S.A. BUILDING CHEMICALS AND MORTARS MAIN OFFICES - FACTORY: 17th km Thessaloniki - Ag. Athanasios Road, P.O. BOX 1043, 570 03 Ag. Athanasios, Greece, Tel.: +30 2310 576 000, Fax: +30 2310 722 475 www.isomat.eu e-mail: info@isomat.eu 1. Substrate preparation The surface to be primed must be dry and free of dust, grease, dirt, etc. 2. Application UNI-PRIMER is thoroughly stirred and uniformly applied on the substrate by brush, roller or spraying, before painting. The technical information and instructions supplied in this datasheet are based on the knowledge and experience of the Department of Research and Development of our company and on results from long-term applications of the product in practice. The recommendations and suggestions referring to the use of the product are provided without guarantee, since site conditions during the applications are beyond the control of our company. Therefore the user is responsible for confirming that the chosen product is suitable for the envisaged application. The present edition of this technical datasheet automatically cancels any previous one concerning the same product.

Open the catalog to page 1

Technical Datasheet UNI-PRIMER 1Pages

Catalog excerpts

All ISOMAT S.A. catalogs and technical brochures

Technical Datasheet UNI-PRIMER
1Pages