Technical leaflet SM-16 Special solvent for polyurethane coatings Description SM-16 is a solvent used for diluting (thinning) polyurethane coatings. Consumption Consumption varies depending on the nature of the application. Fields of application SM-16 is used for diluting the brushable polyurethane waterproofing membrane ISOFLEX-PU, especially when it is going to be applied by spraying, and also for cleaning the tools used for the application of ISOFLEX-PU. Furthermore SM-16 can clean the tools from epoxy coatings residues and can be used as a thinner for epoxy coatings. Packaging 5 l containers. Shelf-life - Storage Shelf-life in sealed containers is 36 months, protected from high temperature (<+300C). Remarks Technical data When applying SM-16 in closed areas, care should be taken for proper ventilation. Smoking and use of flame should be avoided during application. Before use, read safety instructions on the product label. SM-16 is used for diluting polyurethane coatings when added in portions up to 10%. ISOMAT S.A. BUILDING CHEMICALS AND MORTARS MAIN OFFICES - FACTORY: 17th km Thessaloniki - Ag. Athanasios Road, P.O. BOX 1043, 570 03 Ag. Athanasios, Greece, Tel.: +30 2310 576 000, Fax: +30 2310 722 475 www.isomat.net e-mail: [email protected] The technical information and instructions supplied in this datasheet are based on the knowledge and experience of the department of Research and Development of our company and on results from long-term applications of the product in practice. The recommendations and suggestions referring to the use of the product are provided without guarantee, since site conditions during the applications are beyond the control of our company. Therefore the user is responsible for confirming that the chosen product is suitable for the envisaged application. The present edition of this technical data sheet automatically cancels any previous one concerning the same produ