Technical Datasheet ACCELERATOR-5000
2Pages

{{requestButtons}}

Catalog excerpts

Technical Datasheet ACCELERATOR-5000 - 1

Technical Datasheet ACCELERATOR-5000 is a special set accelerator for ISOFLEX-PU 500 that enables its application at low temperatures or in thicker layers. It also increases the thixotropy and mechanical strength of ISOFLEX-PU 500. It is added to ISOFLEX-PU 500 to accelerate its setting. It offers the following advantages: • It enables the application of ISOFLEX-PU 500 at low temperatures. • It prevents the appearance of air bubbles, when ISOFLEX-PU 500 is applied in thick layers. • It allows ISOFLEX-PU 500 to set under low humidity conditions. should be avoided, while it is also essential to add SM-16 special solvent (approx. 5% by weight). Application at temperatures between +8oC and +30oC After mixing ISOFLEX-PU 500 with ACCELERATOR-5000, it is optional to add SM-16 special solvent (2-5% by weight), as the accelerator increases the viscosity of ISOFLEX-PU 500. Application at temperatures > +30oC The use of the accelerator at temperatures higher than 30oC should be avoided, as the pot life of ISOFLEX-PU 500 will be extremely short. Color: transparent/pale yellow Directions for use 6% by weight of ISOFLEX-PU 500: • 1.5 kg of ACCELERATOR-5000 per 25 ACCELERATOR-5000 should be shaken before it is opened and added to ISOFLEX-PU 500. They are then mixed and stirred with a low-speed mixer (300 rpm.), so that the mixture becomes homogeneous. Extensive stirring should be avoided, in order to prevent air entrapment in the material. ISOFLEX-PU 500 should be applied immediately after the addition of ACCELERATOR-5000, as the mixture’s pot life is approx. 15 minutes. Application at temperatures between -10oC and +8oC Before the application, the containers of ISOFLEX-PU 500 and ACCELERATOR-5000 must have been stored in a heated space (at temperatures > +18oC) for at least 24 hours. At low temperatures, thick application layers 12 months from production date, if stored in original, unopened packaging, at temperatures between +50C and +350C. Protect from direct sun exposure and frost. • The mixture’s pot life, after the addition of the accelerator, depends on the temperature and humidity conditions on site. • Containers of ACCELERATOR-5000 that are opened may be used again,

Open the catalog to page 1
Technical Datasheet ACCELERATOR-5000 - 2

even if the original pale yellow color of the material has turned brown. If in doubt, please contact the company’s Technical Support Department. Although the addition of ACCELERATOR-5000 allows the application of ISOFLEX-PU 500 in thicker layers, in case of using more than 1 kg/m2/coat, it is recommended to treat the surface with a special, spiked roller, in order to help the entrapped air escape. ISOMAT S.A. BUILDING CHEMICALS AND MORTARS Thessaloniki: 17th km Thessaloniki - Ag. Athanasios P.O. BOX 1043, 570 03 Ag. Athanasios Tel.: 2310 576 000 Fax: 2310 722 475 Athens: 57th km...

Open the catalog to page 2

All ISOMAT S.A. catalogs and technical brochures