Isolgomma - ROLL
Isolgomma - ROLL
- Product Overview: The document details the specifications for acoustic insulation rolls made of SBR (Styrene Butadiene Rubber) fibers and granules, compacted with a latex binder. The rolls are designed for floor insulation, particularly for floating floors.
- Physical Characteristics: The rolls have a length of 5 meters and a width of 1.04 meters, including a 4 cm adhesive side border for overlapping during installation. The superficial weight varies between 90 to 135 g/m², with a tolerance of ±10%.
- Acoustic Characteristics: The dynamic stiffness is specified as s' EN 29052/1 MN/m³ with a tolerance of ±1. Acoustic insulation performance is measured in dB according to ASTM E 2179-03 and EN ISO 10140 standards.
- Technical Characteristics: The compression load deformation is measured at 10% according to EN 826, with a tolerance of ±5%. Fire grade is classified as EN 13501-1 F.
- Installation Instructions: The installation involves applying an adhesive strip to the wall and floor, ensuring proper alignment in corners. The acoustic mat should be installed with rubber granules facing down, and adjacent mats should be joined using pre-built adhesive tape.
- Packing and Storing: Each pallet is wrapped in waterproof polythene film, and indoor storage is recommended to prevent moisture exposure.
- Additional Notes: The document includes a disclaimer that the technical information provided is subject to change without notice and is the property of ISOLGOMMA.
Catalog excerpts
Floor insulation Roll Line PTB Version: waterproof non woven anti-stretch backing for liquid screed RADIANT Version: heat reflex textile and increased vapour barrier properties • High acoustic insulation performance in reduced thickness • Quick, simple and precise laying of the product • Resistant to humidity_ Isolgomma Srl, Via dell'Artigianato Z.I., 36020 Albettone (VI), tel. 0444790781, fax 0444790784, [email protected], www.isolgomma.com
Open the catalog to page 1
Floor insulation Roll Line TECHNICAL DATA Acoustic insulation for floating floors Time (hours) INSTALLATION INSTRUCTIONS Apply the adhesive strip to the wall and Install the acoustic mat with rubber granules Joint two adjacent mats using the pre-built floor with particular attention in the corners facing down adhesive tape and following the dashed lines Install the floor finishing (ceramic or wood) Cut the exceeding part of the edging strip Isolgomma Srl, Via dell'Artigianato Z.I., 36020 Albettone (VI), tel. 0444790781, fax 0444790784, [email protected], www.isolgomma.com
Open the catalog to page 2All Isolgomma catalogs and technical brochures
ACCESSORIES1 Page
MEGASAFE2 Pages
MEGASTABLE3 Pages
SPORTS AND ANIMAL FLOORING3 Pages
ACOUSTIC INSULATION2 Pages
Solutions for vibrations control12 Pages
Highmat6 Pages
Isolgomma - LUXOR1 Page
Isolgomma - REWALL 402 Pages
Isolgomma - HIGHMAT2 Pages
Isolgomma - POINT3 Pages
Isolgomma - UPGREI2 Pages
Isolgomma - GREI2 Pages
Installation Manual56 Pages
Point6 Pages
Company12 Pages
Flooring24 Pages
Room Acoustics12 Pages
Building40 Pages
Renovation Leaflet2 Pages
- Industrial flooring
- Tile flooring
- Non-slip flooring
- Commercial flooring
- Panel insulation
- Synthetic insulation
- Concrete look flooring
- Wall insulation
- High-performance insulation
- Thermal-acoustic insulation
- Exterior flooring
- Roll insulation
- Flooring insulation
- Interior insulation
- Sound-absorbing panel
- Ceiling insulation
- Euroclass E insulation
- Recyclable insulation