Wall insulation Ceiling insulation TECHNICAL DATA Rewall 40Acoustic and thermal insulation for line existing walls and ceilings Technical specification Airborne noise insulation in 40 mm-thick pre-assembled panels, made of a 8 mm-thick SBR (Stirene Butadiene Rubber) rubber granules hot pressed with polyurethane binder, density of 800 kg/m3, a 20 mm-thick polyester fiber panel, density of 100 kg/m3, and a 12.5 mm-thick plasterboard. The panels dimensions are 1.20 m width x 2.00 m length. • thermal and sound insulating • long term durability and stability • hypoallerginic PACKING AND STORING Each pallet is wrapped and protected with waterproof polythene film. Inside storage is recommended to avoid possible wet storing. m Values obtained in isoigomma acoustic laboratory The suggestions and technical information given above represent our knowledge regarding the properties and the product's uses. ISOLGOMMA reserve the right to modify or update this data without prior notice. This document is the property of ISOLGOMMA and all rights are therefore reserved. ISO|GOMMA Isolgomma Srl, Via dell'Artigianato Z.I., 36020 Albettone (VI), tel. 0444790781, fax 0444790784, [email protected], www.isolgomma.com

Wall insulation Ceiling insulation TECHNICAL DATA Rewall 40Acoustic and thermal insulation for line existing walls and ceilingsINSTALLATION INSTRUCTIONS_FLOOR INSULATION Fix the second gypsum board by gluing Apply the plastic mesh tape in the gypsum Grouting COATED CEILING dots or screwing it on centre line and on the boards jointing lines. side borders with double thread screw. Attach the metal frame along the upper Drill the ceiling e fix the acoustic bracket Fix the metal stud to the acoustic bracket perimeter of the room Lean the Rewall panel to the metal frame Fix the Rewall panel...