Technical Specifications

Acoustic Insulation Panels
The document details the specifications for acoustic insulation panels made from SBR (Styrene Butadiene Rubber) granules compacted with a polyurethane binder. These panels are designed for walls, floors, and vibration control. They feature a black non-woven backing for added protection. The panels measure 1.2 meters in length and 1 meter in width, with a density of 700 kg/m³.

Physical Characteristics
- Thickness: Tolerance of ±10%
- Superficial Weight: 14.00 kg/m²
- Colour: Black
- Density: 700 kg/m³

Acoustic Characteristics
- Transmission Loss Rw: 54 dB for 10 G and 56 dB for 20 G, calculated according to EN ISO 12354-1.

Technical Characteristics
- Thermal Conductivity Coefficient (λ): 0.120 W/m K according to EN 12667.
- Fire Grade: Classified under EN 13501-1.

Packing and Storing
Each pallet is wrapped in waterproof polythene film. Inside storage is recommended to prevent moisture exposure.

Installation Instructions
- Lay an under-wall strip on the dry floor and build the wall.
- Apply a layer of row mortar about 1 cm thick on the first wall.
- Place the panel in the correct position and drill five holes per panel.
- Apply five plastic nails with a hammer.
- Use gypsum-based glue or low-expansion polyurethane glue for panel application.
- Seal panel joints with "Stik" tape.
- Build the second wall using the same process as the first.

Notes
The technical information provided is based on current knowledge and may be updated without notice. This document is proprietary to ISOLGOMMA.