Catalogs >
Isolgomma >
ACOUSTIC INSULATION FLOATING FLOORS

ACOUSTIC INSULATION FLOATING FLOORS
3Pages

Catalog excerpts

TECHNICAL DATA POINT ACOUSTIC INSULATIONFOR FLOATING FLOORS TECHNICAL SPECIFICATION Acoustic insulation supplied in panels with a dimpled shape on one side with a thickness of 18 mm, made of SBR fibres and granules compacted using a polyurethane binder in a hot process. A blue synthetic non woven anti-stretch backing is applied on the upper side. The dimensions of the panels are 100 cm x 120 cm; total superficial weight is 7 kg/m2 and dynamic stiffness (s') is 16 MN/m3. PHYSICAL CHARACTERISTICS Standard Unit POINT Tolerance PACKING AND STORING Each pallet is wrapped and protected with waterproof polythene film. Inside storage is recommended to avoid possible wet storing. NOTES l,) Product thickness measured according to norm EN 12431 equal to the value of "Thickness under load dL (250 Pa)" The suggestions and technical information given above represent our knowledge regarding the properties and the product’s uses. ISOLGOMMA reserve the right to modify or update this data without prior notice. This document is the property of ISOLGOMMA and all rights are therefore reserved.

Open the catalog to page 1

TECHNICAL DATA POINT ACOUSTIC INSULATIONFOR FLOATING FLOORS

Open the catalog to page 2

TECHNICAL DATA POINT FOR FLOATING FLOORS Cut the panels on the underside using a knife Time (hours) Build the screed. If necessary reinforce the screed with a steel mesh Install the floor finishing (ceramic or wood). Cut the exceeding part of the edging strip

Open the catalog to page 3

ACOUSTIC INSULATION FLOATING FLOORS 3Pages

Catalog excerpts

All Isolgomma catalogs and technical brochures

ACOUSTIC INSULATION FLOATING FLOORS
3Pages