Isofire Wall Plissé Manufactured in: Italy It is a self-supporting metal faced panel insulated with mineral wool; the labyrinth configuration and the tongue-and-groove joint with a special place for the screw determine the fully concealed fixing element. The fixing elements are concealed. 1000 Isopan recommends, during the assembly phase, the use of a specific steel plate to distribute the tightening loads of the screw. The number and the place of the fixing elements must guarantee the stresses resistance, included depression loads. Horizontal installation (from bottom to the top) Vertical installation INSTRUCTIONS OF USE For the use of the panels and the related limits, please consult the Technical Manual available on www.isopan.com, General Sales Terms and Annexes defined by ISOPAN. 68

Isofire Wall Plissè see pag. 16 OVERLOAD SPANS STEEL SHEETS 0,5 / 0,5 mm - Support 120 mm UNIFORMLY DISTRIBUTED LOAD 50 PANEL NOMINAL THICKNESS mm 80 PANEL NOMINAL THICKNESS mm 100 UNIFORMLY DISTRIBUTED LOAD PANEL NOMINAL THICKNESS mm 50 PANEL NOMINAL THICKNESS mm WALL PANELS STEEL SHEETS 0,6 / 0,6 mm - Support 120 mm Calculation for static sizing according to the Annex E of the UNI EN 14509 standard. Deflection limit 1/200 ℓ. Thermal load is not considered. PANELS WEIGHT DIMENSION TOLERANCE (EN 14509) DEVIATION mm PANEL NOMINAL THICKNESS mm FIRE RESISTANCE EW 60 - THICKNESS 100 mm FIRE REACTION:...