1. Catalogs
  2. ISOCELL GmbH
  3. ISOCELL Brochure Airtight Products

ISOCELL Brochure Airtight Products
1 /24Pages

ISOCELL Brochure Airtight Products

ISOCELL Brochure Airtight Products
1 /24Pages

Catalog excerpts

ISOCELL Brochure Airtight Products-1

There are no minor roles in a joint production of our roofing membranes and vapour barriers used in combination with the Airstop sealing system. All interacting components take the leading part in airtight construction! AIR-TIGHT PRODUCTS WITH SYSTEM GUARANTEE

 Open the catalog to page 1
ISOCELL Brochure Airtight Products-2

Wind- AND RAIN-TIGHT EXTERIOR The outer shell must keep out rain, wind and snow, like a waterproof rain jacket. ISOCELL’s well-engineered products help you keep out wind and adverse weather. OMEGA roof underlay and facade lining are rain-tight and vapour permeable. Water and fine snow roll off, water vapour can escape from the interior. AIR-TIGHT INTERIOR Structural damage Whereas the construction’s exterior must be protected from the effects of the weather, on the interior the focus is on prevention of humidity ingress into the construction and the insulation. The air-tight layer is always on...

 Open the catalog to page 2
ISOCELL Brochure Airtight Products-3

the advantages of an airtight building envelope :: Energy savings :: Improved thermal insulation :: rotection against defrost water P in the construction :: Improved air quality :: 100% draught-free :: Your ventilation system will work perfectly :: Noise stays outside TEST THE QUALITY OF AIR-TIGHTNESS! Buildings are tested for air-tightness using the “blower door” process. If measurements are conducted promptly during the construction process, it is possible to identify and rectify any leaks without any major expense. Air-tight systems

 Open the catalog to page 3
ISOCELL Brochure Airtight Products-4

ROOF UNDERLAYS for roof constructions (exterior) OMEGA Mono 200 Roof Underlay with integrated adhesive tapes: OMEGA Mono 200 Roof Underlay SK Duo Non-vapour retardant roofing membrane for installation directly on thermal insulation or wood sheathing. The monolithic membrane guarantees improved UV-resistance and prevents ingress of driving rain. OMEGA Quilli Roll dimensions: OMEGA Nail-seal Tape According to classification EN 13859-1/EN 13859-2 OMEGA 180 Underlay with integrated adhesive tapes: OMEGA 180 Underlay SK 1.50 m OMEGA 180 Underlay Plus 1 m/1.50 m OMEGA 180 Underlay SK Duo 1.50 m Non-vapour...

 Open the catalog to page 4
ISOCELL Brochure Airtight Products-5

ROOF UNDERLAYS for roof constructions (exterior) OMEGA Light Roof Underlay with integrated adhesive tapes: also with integrated adhesive tapes - SK, PLUS and SK DUO Non-vapour retardant roof underlay for installation directly on the thermal insulation or wood sheathing. 3-layer fleece combination. Roll dimensions: charcoal grey Roll dimensions: OMEGA Quilli OMEGA Nail-seal Tape Tested for resistance to windblown rain by Holzforschung Austria Order no. 301/2003/1 - T/HH According to classification EN 13859-1/EN 13859-2 Stamisol Pack Non-vapour retardant membrane, extremely hardwearing. For under-roof...

 Open the catalog to page 5
ISOCELL Brochure Airtight Products-6

ROOF UNDERLAYS Accessories OMEGA Quilli For rain and wind-tight adhesion of roof lining at overlaps and joins. Adhesive sealant for sealing nails and staples in the counter-batten area. For gluing joints of wood softboard, OSB and DWD panels. Working temperature: from +7° C Colour: beige Carton contents: Tested for resistance to windblown rain by Holzforschung Austria Order no. 301/2003/2 - T/HH OMEGA Nail-seal Tape Bitumen tape, adhesive on one side, for sealing nail holes under counter-battens Working temperature: from +5° C OMEGA Nail-seal Tape DSK Bitumen tape, adhesive on both sides, for...

 Open the catalog to page 6
ISOCELL Brochure Airtight Products-7

WIND SEALS for wall constructions (exterior) – UV-resistant OMEGA Facade Lining UV-resistant wind seal for open gaps of up to 20 mm in the cladding. Roll dimensions: Wind seal with: charcoal grey OMEGA Façade Tape Facade Lining 2.50 m UV-resistant façade lining for open, nontransparent facades with no restriction to the open sections. Can be exposed to any kind of weather. 1 olid / wood / steel s construction 2 hermal insulation t 3 Stamisol® FA 4 ack ventilation level B 5 Facade facing 2 hermal insulation t 3 tamisol® Color S 4 ack ventilation level B 5 Facade facing Colour: black Windseal with:...

 Open the catalog to page 7
ISOCELL Brochure Airtight Products-8

VAPOUR BARRIERS + AIR SEALS for roof/wall constructions (interior) ÖKO NATUR Vapour Barrier Fabric-reinforced vapour barrier that regulates moisture, used as an air-seal layer for wall and roof constructions. Protects the insulation from condensation due to diffusion. Colour: brown 48 rolls (2,400 m2) AIRSTOP Adhesive Tape AIRSTOP FLEX Adhesive Tape Roll dimensions: Air-seal with: AIRSTOP Sealant SPRINT FH Vapour Barrier ‘fabric-reinforced’ 1.50 m/3.00 m A fabric-reinforced paper vapour barrier and airtight layer for non-vapour retardant roof, wall and ceiling constructions. Roll dimensions:...

 Open the catalog to page 8
ISOCELL Brochure Airtight Products-9

VAPOUR BARRIERS + AIR SEALS for roof/wall constructions (interior) AIRSTOP VAP Vapour Barrier Quality polyethylene foil vapour barrier for tighter seal in wall and roof constructions Roll dimensions: Air-seal with: AIRSTOP ELASTO Adhesive Tape AIRSTOP FLEX Adhesive Tape Colour: turquoise AIRSTOP Adhesive Tape AIRSTOP Sealant SPRINT AIRSTOP DIVA Vapour barrier 1.50 m is a moisture-variable vapour barrier for use in the air-tight layer. It enables a high degree of drying out of the moisture diffusion into the construction. Pay attention to the sequence of construction processes. white transparent...

 Open the catalog to page 9
ISOCELL Brochure Airtight Products-10

GUIDELINES for the use of ISOCELL vapour barriers ATTACHMENT TO THE SUB-SURFACE Vapour barriers can used with wall, roof and ceiling construction elements as an airtight layer and as a vapour retarding layer. Mechanical attachment of the vapour barrier The vapour barrier is usually attached transverse to the position of the rafters, joists or beams with the smooth and/or printed side facing the installer. The lengths are fixed mechanically to the construction’s wood with approx. 10 cm overlap using tacking staples For metal C-studs a temporary attachment using double-sided adhesive tape or even...

 Open the catalog to page 10
ISOCELL Brochure Airtight Products-11

GUIDELINES for the use of Adhesive Tapes Tips for working with adhesive tapes The materials used in processing must be free from dust and grease and the substrates must be dry and load-bearing. In case of doubt we recommend pre-treatment of the substrate with e.g. UNI Primer or with BUBI LF Bonding Primer. Adhesion on the following substrates: wood, wood-based panels (OSB, MDF, 3-ply boards...), brick, plastics (smooth surfaces, free from silicone and wax), metals free from oxides and rust, etc. The greater the pressure applied, the better the performance of the adhesive tape (use a roller to...

 Open the catalog to page 11

All ISOCELL GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.