AIRSTOP FLEX Adhesive Tape To guarantee air and wind-tightness for the skin of a construction it must have the appropriate foils or panel materials providing a permanent seal at overlaps, gaps, joints and penetration points. AIRSTOP Flex Adhesive Tape is slightly expandable, tear-resistant, can be plastered over and painted over, has adhesive generously applied and is suitable for a variety of bonding applications. FIELD OF APPLICATION: • adhesion of vapour retarders and airtight layers • joins of OSB and DWD (wood fibre board) panels, indoors and outdoors • joins and connections with wood, OSB, metal… • for adhesion to masonry use a primer if necessary • Joint connections according to ÖNORM B 5320 and DIN 4108-7 are possible PRODUCT DATA: Elongation: Resistance to temperature: Working temperature: Resistance to ageing: Storage: Storability: UV-resistance: slightly expandable synthetic base material, laminated airtight, pure acrylate adhesive 50 60 80 100 150 25 25 25 25 25 8 8 4 4 2 approx. 0.57 mm longitudinal: lateral: > 130 N/5cm > 80 N/5cm approx. 10% - 40°C bis + 100°C from -5°C 30 years cool and dry 2 years max. 2 months transparent white with green Roll width mm: Roll length m : Rolls/carton: Thickness: Tearing resistance: AIRSTOP imprint APPLICATION: The materials used must be free from dust and grease and substrates must be dry and supporting. The greater the pressure applied, the better the performance of the adhesive tape. AIRSTOP FLEX Adhesive Tape has the function of sealant and not of a strong connector. The pure acrylate adhesive used does not contain resins or other additives that could cause the adhesive film to become brittle and therefore this product is extremely resistant to ageing. Please pay attention to our Guidelines for Installation! 02.2013/ BP www.isocell.at