SCOOP FOR OUTDOOR USE
7Pages

scoop PLANTERS

scoop PLANTERS OUTDOOR USE Scoop is delivered with the LED light preattached under the rim of the pot (where applicable). It comes with an inner pot (in black) which fits snugly inside the Scoop and holds the planting. Do not fill soil above the inner pot. Unscrew the stopper in the drainage hole in the base of the Scoop, using the plastic key. Water will escape through drainage holes in the inner pot, and then drain away through the large hole in the base of the Scoop. OUTDOOR IOTA Garden and Home Limited Wick Road, Wick St. Lawrence North Somerset BS22 7YQ United Kingdom Web :...

scoop Light - Technical specifications WARNING 230 V DO NOT OPEN ! Standard is 5 m of black cable NB! not for use in urban space under ground. Plug Remote and controller Power supply Please do not open! Scoop Moonlight string lights - colour change and light reduction The string light consists of two 1.6 m LED-strings. A watertight junction box for the controller (not waterproof) and a waterproof power supply. The light is controlled with a remote (not waterproof). Specifications for LED-string with colour change: Article No. DF-505ORGB3OD-10MM-12V-WE Voltage: 12V DC Emission angle: 120...

The castor stands a dynamic load of 50 kgs and a static load of 100 kgs (totally for 3 castors 150/300 kgs). Scoop weighs approx. 100-120 kgs inclusive of soil and plant. Mounting of castors and fittings Place Scoop upside down on for instance the wrapping. Push the castor up into the threaded bolt, until it clicks. Turn the enclosed threaded bolt up through the fit ting up into the bushing in Scoop. H1 IOTA Garden and Home Limited Wick Road, Wick St. Lawrence North Somerset BS22 7YQ United Kingdom Web : www.iotagarden.com Mail : mail@iotagarden.com Tel : 01934522617 Int.: +44 1934 522617

Fixing in urban space with fittings 1. Mark in the holes and pre-drill (drill diameter 6 mm). Fix with enclosed screw in firm surface. This method is recom mended by IOTA Or: 2. Mark in the holes and pre-drill. Fix with expansion bolts. (The expansion bolt is only for fixing in concrete and is not en closed). These directions for fixing of Scoop in public domain are only instructive. IOTA will not guarantee for any theft of or vandalism on Scoop. Pull out value of 1 expansion bolt: Concrete 400 kgs Place Scoop upside down on for instance the wrap- ping. Unscrew the drain plug at the bottom...

scoop PLANTERS Cast concrete foot with three threaded bars (threaded bar diameter 8 mm). Fix the first bolt and the washer. Fittings and washer and the second bolt. Adjust bolts until Scoop is level. Fixing in urban space with fittings Place Scoop upside down on for instance the wrapping. Screw on fittings with the enclosed screws in three bush ings at the bottom of Scoop. NB! Make sure that the ca- ble is free of the fittings. IOTA Garden and Home Limited Wick Road, Wick St. Lawrence North Somerset BS22 7YQ United Kingdom Web : www.iotagarden.com Mail : mail@iotagarden.com Tel :...

scoop PLANTERS Screw screws from the self-watering part into Scoop upper part as shown (see also fixing) but not completely. Put some soil and maybe leca pellets in the bottom of the self-watering part and put the tree down on top of it. Fix a rub ber webbing around the trunk. The web bing must not be too tight around the trunk, as this will stunt the growth of the tree. Fix steel wire around the screws and pull steel through the webbing and twist the wire several times around it self, until it seems quite firm. Cover webbing and steel wire with soil. Fixing of tree to Scoop Fixing of tree...