Scoop for indoor use
4Pages

scoop PLANTERS

Insert the water gauge into the tube. This will rise and lower depending on the amount of water sitting in the reservoir. The gauge, and the plastic tube, can be cut down to just above soil level if preferred. Ideally the reservoir should be just full of water, which the roots will soak up through capillary action. INDOOR USE Scoop is delivered with the LED light pre-attached under the rim of the pot (where applicable). It comes with a two-part inner (in black) which fits snugly inside the Scoop, and holds the planting. Place the tub of the inner in the Scoop, and then sit the circular disc...

scoop Light - Technical specifications WARNING 230 V DO NOT OPEN ! Standard is 5 m of black cable NB! not for use in urban space under ground. Plug Remote and controller Power supply Please do not open! Scoop Moonlight string lights - colour change and light reduction The string light consists of two 1.6 m LED-strings. A watertight junction box for the controller (not waterproof) and a waterproof power supply. The light is controlled with a remote (not waterproof). Specifications for LED-string with colour change: Article No. DF-505ORGB3OD-10MM-12V-WE Voltage: 12V DC Emission angle: 120...

The castor stands a dynamic load of 50 kgs and a static load of 100 kgs (totally for 3 castors 150/300 kgs). Scoop weighs approx. 100-120 kgs inclusive of soil and plant. Mounting of castors and fittings Place Scoop upside down on for instance the wrapping. Push the castor up into the threaded bolt, until it clicks. Turn the enclosed threaded bolt up through the fit ting up into the bushing in Scoop. H1 IOTA Garden and Home Limited Wick Road, Wick St. Lawrence North Somerset BS22 7YQ United Kingdom Web : www.iotagarden.com Mail : mail@iotagarden.com Tel : 01934522617 Int.: +44 1934 522617