Intersan Washtrough with Traditional Controls Technical Specifications Data FUNCTIONAL AND FLEXIBLE STAINLESS STEEL WASHTROUGHS Features & Benefits Hygienic Maintenance free Easy installation Durability Vandal resistant Free-standing model “central”, type TC3C manual faucets Sports facilities Food service areas Parcs & recreation facilities Wall hung model TM3CH-R mixing batteries Technical Description WASHTROUGHS are primarily designed for narrow washrooms (the width is only 420 mm). Their large flat surfaces are easy to clean. The troughs can be fitted with simple 1/2” cold water faucets and have one central 1 1/2” drain. Traditional troughs are available in stainless steel AISI 304, thickness 0,8 mm or in anodized aluminium 1,6 mm thick. The trough, the backsplash and the piping cover are one piece. Total width is 420 mm, total height is 370 mm. The front and rear sides are slanted to enable easy maintenance. The bottom of the trough is pressformed to assure proper drainage to the supplied central 1 1/2” drain. The depth of the basin is 125 mm, the integral backsplash is 250 mm high. The cold water supply pipe is made of copper and has an elbow coupling 1/2” M. It is concealed in the back and has 1/2” faucet inlets. The washtrough is also available with 2 pre-installed copper supply pipes for hot and cold water and with panel mounted mixing faucets per station. S.A. INTERSAN N.V. Ommegangstraat 51 9770 Kruishoutem België– Tel ++32(0)9/333.83.83 – Fax ++32(0)9/383.68.62

Intersan Washtrough with Traditional Controls Technical Specifications Data All troughs are equipped with stainless steel or aluminium soap dishes. Anchoring bolts are supplied with each trough for easy attachment to the wall. Central washtroughs consist of 2 back-to-back assembled wall troughs, seated on 2 rigid pedestals supplied with anchoring bolts to the floor. The pedestals are manufactured from zinc-phosphated steel plate, finished with a black epoxy-polyester powder coating. Combination possibilities and dimensions MURAL -manual faucets (R) -selfclosing taps (Z) -lever operated taps (L)...

Intersan Washtrough with Traditional Controls Technical Specifications Data Standard Equipment – – – – Central 1 1/2” strainer soap dishes made of stainless steel or anodized aluminium 1 concealed copper supply pipe and 1/2” faucet inlets 2 concealed copper supply pipes with panel mounted mixing faucet per station. Specification Washtrough made of anodized aluminium thickness 1,6 mm (or stainless steel AISI304, thickness 0,8 mm) with one piece integral trough, backsplash and piping cover. Total width is 420m, total height is 370 mm. The bottom is pressformed to assure proper drainage to the central...