Sanispray ® - Mechanical Individual Foot Control INF Technical Specification Data Possible Applications Schools Factories Manufacturing plants Public facilities Industrial facilities Stadiums Features & Benefits Hygienic Durable Easy installation Vandal resistant Energy saving Technical Description The circular 1,5 mm thick type 304 stainless steel bowl has a parabolic shape for added strength. The shape also keeps water spray inside the bowl and avoids splashing over the bowl. It is self-cleaning and self-draining. The 2,5 mm thick pedestal of the SANISPRAY washfountain is constructed of a one piece tapered roll formed steel cone which is attached to a pressformed stainless steel scuff base anchored to the floor. The service opening in the pedestal is closed by a vandal resistant panel. Three rubber joints are fitted between floor - scuff base pedestal and bowl. The pedestal is constructed of cold laminated 2,5 mm thick steel, treated against corrosion by zinc phosphate and powder coating. The anchoring bolts are made of zinc coated steel. The foot operation mechanism consists of a set of 6 (995 mm circular) or 8 (1130 mm or 1370 mm circular) floorpushbuttons in a stainless steel housing that activate an equal number of pneumatic valves. Each vandal resistant nozzle has a built-in automatic flowcontrol limiting the waterflow to less than 1.9 l/minute. Water is supplied to a nozzle as long as the corresponding floor pushbutton is activated. The stainless steel riser column serves the purpose of both a housing for the supply pipes and the vent pipe, and a support for the sprayhead. The sprayhead has individual nozzles that are readily accessible for cleaning purposes. The dome grated column base is provided with an internal easy to clean grid. All parts above the rim are made of stainless steel type AISI 304. The internal plumbing system includes a 4-way trap with flexible drain connector, 2 stop ball valves, 2 Y-type strainers, 2 flexible supply tubes, thermostatic mixing valve, and a braided stainless steel supply line to the sprayhead. The 1 1/2" vent pipe is made of 3 mm thick stainless steel. This pre-installed vent pipe is also the central tie part for the rigid assembly of the SANISPRAY, thus wall braces are unnecessary. s.a. INTERSAN n.v. Ommegangstraat 51, 9770 Kruishoutem Belgium BOWL SIZES Floor Pushbutton Floor Pushbutton Floor Pushbutton Standard Equipment Standard circular SANISPRAY: stainless steel bowl, powder coated steel conical pedestal and stainless steel scuff base, stainless steel riser column with dome grated base, 2 ball valves, 2 strainers, 2 flexible stainless steel supply lines, 8 pneumatic valves (1370 mm and 1130 mm circular), or 6 pneumatic valves (995 mm circular) that are floorpushbutton activated, 1 flexible stainless steel line to stainless steel sprayhead, 4-way trap with flexible drain connector, 1 1/2" stainless steel no-hub vent pipe (extends 1085 mm above floor), optional integral dispenser for liquid soap (bags). Premixed, (or cold water) column includes all the above but has only 1 ball valve, strainer and supply line and does not have a thermostatic mixing valve. Soap System For Intersan soap bags only Standard : water only, no soap. An integral pushbutton controlled liquid soap dispenser for soap bags may be furnished. The container can be easily filled and cleaned through the large vandal resistant locking cover. The soap container and cover are made of AISI 304 stainless steel. The plastic center lid of the soap dispenser is preplumbed to allow supply lines and vent pipe to pass through when necessary for installation.

Sanispray ® - Mechanical Individual Foot Control INF Technical Specification Data Premixed (or cold water) column: identical to the standard unit but it has only one stainless steel supply line with ball valve and strainer, instead of 2, and does not have a thermostatic mixing valve. SH: A stainless steel shroud concealing overhead supplies and vent is available. Standard length is 1 m. TF: Towel dispenser assembly (includes shroud). L: Liquid soap dispenser with pushbuttons for bags. JH: Junior height option reduces the floor to rim height dimensions by 150 mm V: Stainless steel pedestal EH:...