Product Specifications

The document provides technical specifications for window and door elements, focusing on thermal insulation, burglary resistance, and structural performance.

Thermal Insulation Parameters

• Uf (frame heat transfer coefficient) ranges from 1.2 to 3.5 W/m²K depending on the model.
• Uw (overall window heat transfer coefficient) ranges from 1.22 to 2.9 W/m²K, with specific values tied to element sizes and glazing (Ug) values.
• Glazing thermal transmittance (Ug) values are typically 0.6 or 0.7 W/m²K, with some models at 1.0 W/m²K.
• Installation depths vary between 50 mm and 90 mm.

Security and Resistance

• Burglary resistance is rated up to class RC2.
• Watertightness and resistance to high wind loads are rated up to class C5 / B5.
• Air permeability is classified as class 4.

Acoustic Performance

• Sound reduction values reach up to 43 dB, indicating good noise insulation.

Element Dimensions

• Common element sizes include 1,230 x 1,480 mm and 3,000 x 2,300 mm.

Product Models

One model mentioned is the INOFORM F 55 SKYLINE, which features:

• Uf of 1.3 W/m²K
• Uw of 1.3 W/m²K with Ug = 1.0 W/m²K glazing
• Installation depth of 70 mm
• Resistance classes: C5/B5 for wind and watertightness, class 4 for air permeability, and RC2 for burglary protection
• Sound reduction up to 43 dB

Contact Information

Multiple international contact numbers and emails are provided for sales and support across regions including Europe, Africa, and the Middle East.

Summary of Critical Parameters

This document is primarily a technical specification sheet for window and door products emphasizing energy efficiency, security, and durability standards.