AquaCheck® DB
1Pages

1000/1500 2000/2500 SPECIFICATION INFORMATION 1.0 PRODUCT NAME AquaCheck® DB 1000/2000 Series Light and Moderate-Duty Composite Drainage Boards COMPOSITE DRAINAGE BOARD AquaCheck® DB 1000 Series is used in light-duty (residential) applications. AquaCheck® DB 2000 Series is used in moderate-duty (commercial) applications. 4.0 TECHNICAL DATA 4.1 Applicable Standards • American Society for Testing & Materials (ASTM) AquaCheck® DB 1000/2000 Series consists of an impermeable polymeric sheet cuspated under heat and pressure to form a high flow dimpled drainage core. The core is then bonded to a layer of non-woven filter fabric designed to retain soil and sand particles to prohibit sediment build-up. Insulation Solutions Inc. 401 Truck Haven Road East Peoria, IL 61611 Engineering Assistance Toll Free: 866-698-6562 Fax: 309-698-0065 www.insulationsolutions.com AquaCheck® DB 1500/2500 have identical properties to AquaCheck® DB 1000/2000 with the addition of a protection film bonded to the backside of the cuspated core to provide protection for waterproofing membranes. 3.3 Product Dimensions & Weight: AquaCheck® DB 1000/200 Series are multi-faceted composite drainage boards designed to protect waterproofing systems and manage subsurface water around foundations. Hydrostatic relief is provided by retaining soil backfill and only allowing water to pass into the drainage core. Water is collected and passed to proper collection systems. Proven applications include: Foundation Walls, Retaining Walls, Planters, Roof Gardens, Bridge Abutments and Under Slab. • ASTM D 1777 Standard Test Method for Thickness of Textile Materials • ASTM D 1621 Standard Test Method for Compressive Properties of Rigid Cellular Plastics • ASTM D 4716 Standard Test Method for Determining the (in-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head • ASTM D 4491 Standard Test Methods for Water Permeability of Geotextiles by Permitivity • ASTM D 4833 Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products • ASTM D 4632 Standard Test Method for Grab Breaking Load and Elongation of Geotextiles TEST METHOD Test Procedure Applicable Standard AQUACHECK® DB 1000 SERIES English AQUACHECK® DB 2000 SERIES English CORE Thickness, Nominal Compressive Strength (Hydraulic Gradient = 1) FABRIC Flow Grab Tensile * AOS - Apparent Opening Size (U.S. Standard Sieve) ** EOS - Equivalent Opening Size (Geotextile Fabrics) Note: To the best of our knowledge, these are typical property values and are intended as guides only, not as specification limits. Insulation Solutions Inc.® makes no warranties as to the fitness for a specific use or merchantability of products referred to, no guarantee of satisfactory results from reliance upon contained information or recommendations and disclaims all liability for resulting loss or damage.