Instant Hot Water Dispensers Model SST-FLTR Stainless Steel Tank dispenses filtered near-boiling 200˚F water instantly ™ Water dispenser sold separately Submittal Sheet • 2/3 gallon stainless steel tank 2/3 gallon stainless steel tank dispenses 60 cups of 200˚F water per hour 115 volts, A.C., 750 watts, 6.25 amp heating element with grounded three (3) prong plug Snap-action, adjustable from 160˚F to 210˚F (factory pre-set at 200˚F) Meets U.L. 94HF-1 flammability specification • Easy to adjust temperature control • Tool-free tank connections and dry start protection to ease installation • Provides 60 cups/hour of near-boiling water • F-201 Filtration System included for fresher tasting water - Reduces Chlorine, taste and odor for clean, refreshing taste - Sanitary, quick-change filter cartridge makes replacement easy • 115 volts, 750 watts, 6.25 amps • For use with InSinkErator Indulge™ Series instant hot water dispensers Recommended 30-125 psi Supply Pressure Shipping Weight Approximately 7.7 lbs. Sample Specification Instant hot water dispenser(s) shall be equipped with an InSinkErator Model SST-FLTR stainless steel tank with filtration, adjustable temperature from 160°F to 210°F and instant, self-closing hot valve. 11" In-Home Parts and Service Warranty* Tank: 3-years Filtration System: 1-year (excluding replaceable filter cartridge) * The complete InSinkErator warranty is included in the Care & Use booklet packed with each unit. US Pat. D532,497 S (tank enclosure) Complies with California Lead Plumbing Law USA 1-800-558-5700 www.insinkerator.com Canada 1-800-561-1700 www.insinkerator.ca HWD423-12F-45-10 The Emerson logo is a trademark and a service mark of Emerson Electric Co. InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. ©2012 InSinkErator, a business unit of Emerson Electric Co. All Rights Reserved.