PROJECT: ITEM NO.: FOOD WASTE REDUCTION SYSTEM PRODUCT FEATURES & SPECIFICATIONS • Up to 85% volume reduction • Capacity 700 lbs (317.5 kg) of waste per hour • Fits under standard table – minimum height 34" (863.6 mm) • Does not require cardboard • Stainless steel construction • Quick and easy to clean – no tools required • One year full warranty • Processes 100% food waste or up to 50% disposables • NEMA 4 stainless steel electrical control panel • Removeable auger and screen • Interlock on discharge chute • Water usage 2-5 GPM (7.6-18.9 LPM) – sink or bowl configuration • Trough application – contact factory ELECTRICAL SPECIFICATIONS WX-8 – 208-230V, 60 Hz, 3 Ph, 7.7/9.4 amps (Disposer 6.0/7.4 amps, WX 1.7/2 amps) WX-9 – 460V, 60 Hz, 3 Ph, 4.7 amps (Disposer 3.7 amps, WX 1 amp) DISPOSER MOUNTING ASSEMBLIES #6 Collar Adaptor for welding into trough or sink, provides 6-5/8" (168.3 mm) opening, includes splash baffle 18" Type A Sink Bowl Assembly with two water nozzles, includes removable splash baffle and stainless bowl cover ACCESSORIES Trough Nozzle - 1" (25.4 mm) NPT WXP Inlet/Outlet Flange - 2" (50.8 mm) NPT (secondary) (Trough or high water flow applications) Dejamming Wrench A complete collection of our product drawings is available for download at the InSinkErator Revit/CAD Library, which can be found at www.insinkerator.com/foodservice. Product information is also accessible on The KCL CADalog. More information is available from KCL at www.kclcad.com. 4700 21st STREET RACINE, WI 53406-5093 TEL: 800-845-8345 FAX: 262-554-3620 www.insinkerator.com InSinkErator is a business unit of Emerson Electric Co. The Emerson logo is a trademark and a service mark of Emerson Electric Co. InSinkErator ©2012     Printed in USA     Form No. F269-12L-45-02

SYSTEM COMPONENTS This System Includes: • Waste Xpress Unit • 3 HP Disposer • Disposer mount (collar or bowl) • Syphon Breaker • Flow Control Valve 5 GPM (18.9 LPM) • Magnetic Silver Saver • 10 gallon (37.9 liter) Waste Can • 3" (76.2 mm) to 2" (50.8 mm) disposer waste outlet reducer fitting • (2) 24V Water Solenoids • WX-101A Control Center Items Supplied by Others: • Plumbing from cold water supply to bowl or trough • Plumbing from hot water supply to Waste Xpress • Plumbing from disposer to Waste Xpress or Waste Xpress to floor sink or floor drain • Shut off valves • Electrical connections...

PLUMBING NOTES Waste Connection • • • • 2" (50.8 mm) NPT – used between disposer, Waste Xpress and drain When connecting the drain line from the disposer to the Waste Xpress use a maximum of (4) 90° bends (45° bends are recommended) with a 1/4" (6.4 mm) drop per foot of run or as local codes apply. Floor sink or drains should be installed per local codes but kept clear of yet accessible to pulper. Trough applications in excess of 10' (3.1 m) and/or systems plumbed with a cold water supply greater than 7 GPM (26.5 LPM) must incorporate the second drain outlet from the pulper and be drained independently...

DIMENSIONS 2" (50.8 mm) NPT Inlet (Either Side) 2" (50.8 mm) NPT Outlet (Either Side) 15" (381 mm) 15-3/4" (400.1 mm) 15-1/8" (384.2 mm) 18-3/4" (476.3 mm) 8-5/8" (219.1 mm) 5-1/4" (133.4 mm) 9-7/8" (250.8 mm) 8-1/4" (209.6 mm) 14" (355.6 mm) 12-1/8" (308.0 mm) 5-5/16" (134.9 mm) 6-3/4" (171.5 mm) 1-5/8" (41.3 mm) Waste Xpress Top View 27-3/8" (695.3 mm) Leveling Foot Adjustment Range 2-3/4" (69.9 mm) Waste Xpress Front View Control Center Front View 1" (25.4 mm) Control Center Side View 1/2" (12.7 mm) Hot Water Inlet 8" (203.2 mm) 6-1/2" (165.1 mm) 7-7/8" (200.0 mm) 13" (330.2 mm) 33-1/2" (850.9...