PROJECT: ITEM NO.: MODEL H778 Hot Water Dispenser APPLICATION: Designed for large volume usage of steaming hot water. Up to 100 cups of 200° hot water per hour are provided by the system’s 2/3-gallon tank. Saves time, work and water – you only heat the water you use. FEATURES • Foodservice grade heating element provides 100 cups of near-boiling water per hour • Traditional twist-handle operation • Chrome-plated faucet completely insulated from 200°F water • Elevated spout provides access for large vessels • 2/3-gallon Stainless Steel Tank construction for longer life • Easy-to-adjust temperature control on front panel • Mounts in standard sink opening or 1-1/4" drilled hole • Tool-free tank connections and dry start protection for easy installation • 1-year full warranty on parts and labor SPECIFICATIONS Capacity 2/3-gallon tank dispenses 100 cups of 200ºF water per hour Electrical 120 Volts A.C., 1300 Watts, 10.8 amp heating element with 36" cord and grounded plug Thermostat Snap action, adjustable from 160°F to 210ºF (factory pre-set at approximately 200°F) Insulation Meets U.L. 94HF-1 flammability specification Valve Instant, self-closing Recommended Supply Pressure 30-125 psi DIMENSIONS 6-3/8" 4-1/2" 4-3/8" 4" Flexible Outlet Tube 14-1/2" Max 1/4" Incoming Water Supply Inlet Tube Flexible Vent Tube Shipping Weight Approximately 9.5 lbs. To ensure optimum performance, maximum distance between tank and base of faucet should be 14-1/2" or less. Unit Depth 6-3/4" Max 2/3 Gallon Tank (2.5 Liters) 11" Adjustable Thermostat 6-1/8" Drain Plug Our products appear on The KCL CADalog CD-ROM based CAD Foodservice Symbol Library. More information is available from Kochman Consultants, Ltd. at www.kclcad.com. 1.800.845.8345 www.insinkerator.com/foodservice F185-12B-45-02 | Printed in U.S.A. The Emerson logo is a trademark and a service mark of Emerson Electric Co. InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. ©2012 InSinkErator, a business unit of Emerson Electric Co. All Rights Reserved.