Instant Hot Water Dispensers Graceful, clean, transitional design dispenses instant near-boiling 200°F water and cool drinking water Submittal Sheet • Hot & Cool – Dispenses near-boiling 200°F and cool drinking water 2/3-gallon stainless steel tank dispenses 60 cups of 200˚F water per hour 115 volts A.C., 750 watts, 6.25 amp heating element with grounded three (3) prong plug Snap-action, adjustable from 160˚F to 210˚F (factory pre-set at 200˚F) • 115 volts, 750 watts, 6.25 amps • Available in these designer finishes: chrome and satin nickel Meets U.L. 94HF-1 flammability specification Instant, self-closing Cold Valve Instant, self-closing Recommended Supply Pressure Shipping Weight Required Hole Diameter 1 -1/2" standard sink hole • Durable all metal construction • Includes 2/3-gallon stainless steel tank • Easy to adjust temperature control • Tool-free tank connections and dry start protection to ease installation • Provides 60 cups/hr of near-boiling water • Fits countertops up to 3” thick • 3-Year We Come To You ® In-Home Service Warranty* Dimensions Minimum 2-5/8" required from sink hole center to backsplash Sample Specification Water Supply Inlet Tube Flexible Outlet Tube Flexible Vent Tube Instant hot water dispenser(s) shall be InSinkErator Model HC-Wave-SS with 2/3-gallon stainless steel tank, adjustable temperature from 160°F to 210°F and instant, self-closing hot valve. Warranty: 3-year parts and in-home service. * The complete InSinkErator warranty is included in the Care & Use booklet packed with each unit. Complies with California Lead Plumbing Law USA 1-800-558-5700 www.insinkerator.com Canada 1-800-561-1700 www.insinkerator.ca HWD420-12F-45-10 The Emerson logo is a trademark and a service mark of Emerson Electric Co. InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. ©2012 InSinkErator, a business unit of Emerson Electric Co. All Rights Reserved.