Instant Hot Water Dispensers Easy-grip handle to dispense instant near-boiling 200˚F water effortlessly Submittal Sheet • Hot Only – Dispenses near-boiling 200°F Specifications Capacity 2/3-gallon stainless steel tank dispenses 60 cups of 200˚F water per hour 115 volts A.C., 750 watts, 6.25 amp heating element with grounded three (3) prong plug Snap-action, adjustable from 160˚F to 210˚F (factory pre-set at 200˚F) Meets U.L. 94HF-1 flammabiltiy specification Instant, self-closing • 35% more near-boiling water from larger 2/3-gallon stainless steel tank • Easy to adjust temperature control • Tool-free tank connections and dry start protection to ease installation • Provides 60 cups/hr of near-boiling water • 3-Year We Come To You® In-Home Service Warranty* • 115 volts, 750 watts, 6.25 amps • A.D.A. compliant • Available in these designer finishes: chrome, white, and biscuit Recommended 30-125 psi Supply Pressure Minimum 1-1/4" required from sink hole center to backsplash Sample Specification 5-5/8" 1/4" Incoming Water Supply Inlet Tube Shipping Weight Approximately 7.4 lbs. Required Hole Diameter 1-1/4" – 1-1/2" standard sink hole Instant hot water dispenser(s) shall be InSinkErator Model H990-SS with 2/3-gallon stainless steel tank, adjustable temperature from 160°F to 210°F and instant, self-closing hot valve. Flexible Outlet Tube Flexible Vent Tube Warranty: 3-year parts and in-home service. 11" NOTE: Max counter thickness is 3". * The complete InSinkErator warranty is included in the Care & Use booklet packed with each unit. Job Specifications Complies with Lead Plumbing Law The Emerson logo is a trademark and service mark of Emerson Electric Co. InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the right ot change or discontinue models. © 2011 InSinkErator, a division of Emerson Electric Co. All Rights Reserved.