Instant Hot Water Dispensers Our finest line of instant hot water dispensers for use with our Stainless Steel Tank for filtered near-boiling 200°F water Tank and filter sold separately (SST-FLTR) Submittal Sheet • Hot Only – Dispenses near-boiling 200°F water Ceramic Valve Instant, self-closing • Unique single handle design provides a sleek, minimalist look Shipping Weight • OptiPush™ hot side activation with automatic shut off Required Hole Diameter • Activate the faucet handle by first pressing down and then pushing backward • Ceramic valve resists corrosion • Durable all brass faucet construction • 5-Year We Come To You In-Home Service Warranty* ® • For use with InSinkErator Stainless Steel Tank and F-201 Filtration System • Available in these designer finishes: chrome and satin nickel Minimum 2-1/2" required from sink hole center to backsplash Sample Specification 5-1/2" Water Supply Inlet Tube Flexible Outlet Tube Flexible Vent Tube 1/4" Incoming Water Supply Instant hot water dispenser(s) shall be InSinkErator Model F-H3300 with 2/3-gallon stainless steel tank, adjustable temperature from 160°F to 210°F and instant, self-closing ceramic hot valve. Warranty: 5-year parts and in-home service. NOTE: Max counter thickness is 3". * The complete InSinkErator warranty is included in the Care & Use booklet packed with each unit. Job Specifications Complies with California Lead Plumbing Law USA 1-800-558-5700 www.insinkerator.com Canada 1-800-561-1700 www.insinkerator.ca HWD412-12F-45-10 The Emerson logo is a trademark and a service mark of Emerson Electric Co. InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. ©2012 InSinkErator, a business unit of Emerson Electric Co. All Rights Reserved.