Food Waste Disposers Submittal Sheet Our Badger 5XP model provides more power and a longer warranty than the Badger® 5 or Badger® 1. ® This model also offers the following features and benefits: • 3/4 Horsepower Heavy Duty Motor (Quiet Dura-Drive® Induction Motor) Specifications Type of Feed Continuous On/Off Control Wall Switch Motor Single Phase HP 3/4 Volts 120 HZ 60 RPM 1725 Unit Finish Waterborne Grey Enamel Overall Height 12-5/8” Grind Chamber Capacity 26 oz. Manual Reset Overload Sample Specification 4" Permanently Lubricated Upper & Lower Bearings Motor Protection 125/8" Lubrication • Space-Saving Compact Design 6" Intermittent • Rugged Galvanized Steel Construction (For Disposer Durability) Dishwasher Drain Connection 9.5 Time Rating • 3-Year We Come To You® In-Home Parts And Labor Service Warranty Dimensions Amp. (Avg. Load) Average Water Usage Approx. 1 Gallon per Person Per Day Food Waste Disposer(s) shall be InSinkErator Badger 5XP®, continuous feed, with 3/4 H.P. motor, galvanized steel grinding elements with two stainless steel 360° swivel lugs. Self-service wrench. Average Electrical Usage 3-4 KWh per Year Drain Connection 1-1/2” Cushioned Slip Joint Dishwasher Drain Connection Yes Shipping Weight (Approx.) 15 lbs. 2 oz. Warranty: 3- Year parts and in-home service. 5" * The complete InSinkErator warranty is included in the Care & Use Booklet packed with each unit. 65/16" * Distance from bottom of sink to center line of disposer outlet. Add 1/2" when stainless steel sinks are used. ** Length of tailpipe from center line of disposer outlet to end of tailpipe. NOTE: Plumb waste line to prevent standing water in disposer motor housing. Job Specifications Food waste disposers can provide an environmentally responsible alternative to transporting food waste to landfills. And they can help reduce greenhouse gas emissions. At capable wastewater treatment plants, food waste can be recycled to produce renewable energy. Additionally, capable wastewater treatment plants can process food waste into fertilizer. (Check the plant in your area.) The Emerson logo is a trademark and service mark of Emerson Electric Co. The mounting collar configuration is a trademark of Emerson Electric Co. 1-800-558-5700 www.insinkerator.com H715-10L-02-02 Printed in U.S.A. InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. © 2010 InSinkErator, InSinkErator is a division of Emerson Electric Co. All Rights Reserved.