INOSIDE CLADDING

1 / 2 PagesView full catalog

INOSIDE CLADDING

Product catalog summary

Main Installation Principles:

Plank ends must be attached to the spars or mounting profiles.
The recommended distance between the bars is 300 mm.
Due to the properties of WPC (Wood Plastic Composite), a space of at least 10 mm must be maintained when connecting the boards and between the boards.
The customer must be familiar with the provided information before installation, and any claims must be made prior to mounting.

Components and Profiles:

Mounting clips: TTE-P, TTE-F, TTE-FN
"F" profile: FP-30
Start clip: TET-03
Start/end profile: UPA
Outer corner profile: IP
Inner angle profile: VP
Connection profile: SP
Primary L profile: TET-03

Installation Scheme:

Vertical and horizontal mounting schemes are provided, detailing the placement of components such as wall, thermal and wind insulation, mounting bracket, guiding profile, mounting profile, start clip, mounting clips, F profile, ground profile, outer angle profile, inner angle profile, start/end profile, connecting profile, and cladding board.

Catalog excerpts

INOSIDE" CLADDING www.inowood.eu Decoration cladding AD 1= in The customer is familiar to the information provided above. Any claims must be brought before mounting.

Open the catalog to page 1

Scheme for main installations principles 1. Wall; 2. Thermal and wind insulation; 3. Mounting bracket; 4. Guiding profile; 5. Mounting profile; 6. Primary L profile; 7. Start clip; 8. Mounting clips; 9. F profile; 10. Ground profile; 11. Outer angle profile; 12. Inner angle profile; 13. Start/ end profile; 14. Connecting profile; 15. Cladding board.

Open the catalog to page 2

INOSIDE CLADDING

INOSIDE CLADDING

Catalog excerpts

All Inowood catalogs and technical brochures