„INO DECK“ MOUNTING RECOMENDATIONS Terrace decking boards 20x136-Solid20; 26x140-Solid26; 26x138-Classic; Mounting clip TTE-N Mounting principles Recommended distance between beams centers DBC (not more): for Solid20 - 400 mm, for hollow boards - 500 mm and for Solid26 - 600 mm. It is necessary to leave min 10 mm gap between boards and end profiles or walls (A,B,C). It is unacceptable exceeding the edge of the lag by the board more than 30 mm or fixing of boards less than in three places. In order to ensure free water flow when mounting a plinth plank, the plank cannot exceed the limits of the board to the height. Rear/ Corner profile Terrace board Terrace board Terrace beam Terrace Beams Two beams are used for boards connection (10 mm gap). The beams must be fastened to the base. Terrace Beam The plank must be fastened with preliminary boring. * The WPC raw material has natural wood fiber inside, that's why color saturation may change from sunlight and moisture (usually stabilizes in 6-8 weeks). In addition each batch ( sometimes even inside) may have a slight mismatch of color saturation. *Any claims must be brought before mounting. The customer is familiar to the information provided above