S-AG 38
3Pages

S-AG 38 Series SITE SIZABLE PVC S-AG 3836 - 36” Complete Kit S-AG 3848 - 48” Complete Kit S-AG 3860 - 60” Complete Kit S-AG 3872 - 72” Complete Kit S-AG 3896 - 96” Complete Kit Modify length and outlet location on site Works with 2” clamp down floor with 2” throat/strainer size 12 gauge, 316L stainless steel Wedge Wire grate NOT INTENDED for installation across a barrier-free threshold Compatible with: PVC Liner, Rubber Liner (Chloraloy ®), Hot Mop, Lead Pan, Copper Pan, or Fiberglass Flow rate - 9 gpm per outlet Flow rate measured at outlet only. Measurement does not account for water in channel or sheeting on shower floor. Additional outlets can be added and combined into a larger waste line to increase flow rates Care & Maintenance S-AG 38 stainless steel linear drain top grates are made of 316L stainless steel. This material is non-porous, hygienic, rust-free and extremely durable. Bar Keepers Friend® and Soft Scrub® are commonly available products that can be used to protect and clean your Satin Stainless drain cover. For stains that have been left for an excessive amount of time, stronger cleaning agents such as Compound 302® may be needed. For Polished Stainless and other finishes we recommend a mild soap and a soft cloth for cleaning. DO NOT use any abrasive cleaners, scrub pads or allow household cleaning agents, such as bleach, to sit on the drain cover for a long period of time. Stainless steel does not rust. External factors, such as contamination from other highly ferrous metals, built up road salt, sea salt, or chlorine may have caused ”surface” rust which can be removed using Barkeepers Friend®, Soft Scrub® with Bleach, or Compound 302® . Always follow the directions on the bottle. Follow proper maintenance procedures to prevent excessive surface rust. In areas of frequent exposure to salt, chlorine, and other chemical compounds, maintenance of the stainless grates should be performed at least 2-3 times per year. Infinity Drain 145 Dixon Avnue Amityville, NY 11701 Phone: 516.767.6786 Fax: 516.740.3066 www.Infinity Drain.com NOTE: Installer must verify all rough-in dimensions prior to installation and consult local and national codes. Conformity and compliance to local and national codes are the responsibility of the installer. Dimensions are subject to manufacturers tolerance and change without notice

Infinity DrainS-AG 3836 S-AG3848 S-AG 3860 S-AG 3872 Model Number Infinity Drain 145 Dixon Avnue Amityville, NY 11701 Phone: 516.767.6786 Fax: 516.740.3066 www.InfinityDrain.com NOTE: Installer must verify all rough-in dimensions prior to installation and consult local and national codes. Conformity and compliance to local and national codes are the responsibility of the installer. [ID] INFINITY DRAIN CANADA -CSAB 125.2 USA - ASME A112.18.2 FM008-08-17 Dimensions are subject to manufacturers tolerance and change without notice. We can assume no responsibility for use of...

Infinity DrainS-AG 3896 ONLY E 38 PVC STOPEND (2) A 38 WEDGE WIRE GRATES -2 INCH CLAMP DOWN DRAIN ASSEMBLY (MATERIAL CAN BE CAST IRON, ABS. OR PVC] ■ SECTION A-A Model Number Optional Components F 65 PVC Non-Threaded Outlet GJC 38 PVC Straight Joiner Strip GAM 38 PVC 90° Angle Joiner TNRN-P PVC Threaded Extension Nipple UCP 2 Universal 2" Clamping Plate UCP 4 Universal 4" Clamping Plate UCP 42 Universal Reducing Plate (Adapts 4" or 3" existing throat size to 2") Add Clamp Down Drain CDA 22 Clamp Down Drain ABS CDI 22 Clamp Down Drain Cast Iron CDP 22 Clamp Down...