G Series
2Pages

3/16” Thick Stainless Steel strainer Components: (Each Sold Separately) 2” Residential Throat or 4” High Flow Throat Herring Strainer Line Strainer Drain body (Cast Iron, PVC or ABS) with 2” or 4” throat Square Strainer Uses Hot Mop, Lead Pan, PVC Vinyl Liner, Rubber Liner (ChloraloyTM) Copper Pan or Fiberglass waterproofing Otto Strainer Residential Stainless 2” Throat High Flow Stainless 4” Throat - Magnetically fastening strainer - Requires traditional 4-way floor pitch - Integral hair catch 2” Residential Hair Catch 4” High Flow Hair Catch CDI 22 2” Clamp Down Drain Cast Iron with 2” No Hub Outlet CDIT 22 2” Clamp Down Drain Cast Iron with 2” Threaded outlet CDA 22 2” Clamp Down Drain ABS with 2” Outlet CDP 22 2” Clamp Down Drain PVC with 2” Outlet CDI 42 4” Clamp Down Drain Cast Iron with 2” No Hub Outlet Herring Strainer Lines Strainer CDIT 42 4” Clamp Down Drain Cast Iron with 2” Threaded outlet CDA 42 4” Clamp Down Drain ABS with 2” Outlet CDP 42 4” Clamp Down Drain PVC with 2” Outlet CDI 43 4” Clamp Down Drain Cast Iron with 3” No Hub Outlet CDIT 43 4” Clamp Down Drain Cast Iron with 3” Threaded outlet CDA 43 4” Clamp Down Drain ABS with 3” Outlet Square Strainer Otto Strainer CDP 43 Clamp Down Drain PVC with 3” Outlet Drain Assemblies: (Includes) DI 22 : Satin Stainless Polished Stainless Lifetime Oil Rubbed Bronze Note: Installer must verify all rough-in dimensions prior to installation and consult local and national codes. Conformity and compliance to local and national codes are the responsibility of the installer. Infinity Drain 18 Secatoag Avenue Port Washington, NY 11050 Phone: 516.767.6786 Fax: 516.740.3066 www.InfinityDrain.com

Infinity Drain 18 Secatoag Avenue Port Washington, NY 11050 Phone: 516.767.6786 Fax: 516.740.3066 www.InfinityDrain.com Note: Installer must verify all rough-in dimensions prior to installation and consult local and national codes. Conformity and compliance to local and national codes are the responsibility of the installer. Page 2 of 2 Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.