FCSIG 65 Series
3Pages

Fixed Flange Slot Drain with Schluter KERDI ® FCSIG 6524 - 24” Complete Kit FCSIG 6532 - 32” Complete Kit FCSIG 6536 - 36” Complete Kit FCSIG 6542 - 42” Complete Kit FCSIG 6548 - 48” Complete Kit FCSIG 6560 - 60” Complete Kit Channel provided with factory applied Schluter® KERDI KERDI bond to channel covered under Infinity Drain warranty 16 gauge, 304L stainless steel grate Grate can be removed for cleaning 16 gauge, 304L stainless steel channel Flow rate - 9 gpm per outlet Compatible with: liquid applied or fabric sheet membranes ▫ Flow rate measured at outlet only. Measurement does not account for water in channel or sheeting on shower floor. Additional outlets can be added and combined into a larger waste line to increase flow rates Care & Maintenance FCSIG 65 stainless steel linear drains are made of 304L stainless steel. This material is non-porous, hygienic, rust-free and extremely durable. Bar Keepers Friend® and Soft Scrub® are commonly available products that can be used to protect and clean your Satin Stainless drain cover. For stains that have been left for an excessive amount of time, stronger cleaning agents such as Steel Brite® may be needed. For Polished Stainless and other finishes we recommend a mild soap and a soft cloth for cleaning. DO NOT use any abrasive cleaners, scrub pads or allow household cleaning agents, such as bleach, to sit on the drain cover for a long period of time. Stainless steel does not rust. External factors, such as contamination from other highly ferrous metals, built up road salt, sea salt, or chlorine may have caused ”surface” rust which can be removed using Barkeepers Friend®, Soft Scrub®, or Steel Brite® . Always follow the directions on the bottle. Follow proper maintenance procedures to prevent excessive surface rust. In areas of frequent exposure to salt, chlorine, and other chemical compounds, maintenance of the stainless grates should be performed at least 2-3 times per year. Infinity Drain 145 Dixon Avenue Amityville, NY 11701 Phone: 516.767.6786 Fax: 516.740.3066 www.infinitydrain.com NOTE: Installer must verify all rough-in dimensions prior to installation and consult local and national codes. Conformity and compliance to local and national codes are the responsibility of the installer. Dimensions are subject to manufacturer’s tolerance and change without notice. We can assume no

GRATE CAN BE ADJUSTED UPWARDS AN ADDITIONAL 1/2” Model Number (Maximum Overall Length) (Maximum Grate Length) 1 - UA 6524 Grate 1 - FCS 6524 Channel with Schluter® KERDI 1 - HS 2 Hair Strainer 1 - AKEY Lift Out Key 1 - UA 6532 Grate 1 - FCS 6532 Channel with Schluter® KERDI 1 - HS 2 Hair Strainer 1 - AKEY Lift Out Key 1 - UA 6536 Grate 1 - FCS 6536 Channel with Schluter® KERDI 1 - HS 2 Hair Strainer 1 - AKEY Lift Out Key 1 - UA 6542 Grate 1 - FCS 6542 Channel with Schluter® KERDI 1 - HS 2 Hair Strainer 1 - AKEY Lift Out Key 1 - UA 6548 Grate 1 - FCS 6548 Channel with Schluter® KERDI 1 - HS...

Custom Finishes □ Satin Stainless NOTE: Custom color matching available upon request X: LENGTH: Overall Inside Length of Channel (inches): ______________ Desired finished dimension For lengths greater than 60”, multiple grates are supplied, unless otherwise noted. Y: OUTLET LOCATION: _______ # of outlets | RUSH: Yes ________ Center of Outlet(s) to inside right edge: Y1 _______ Y2 ________ Y3 _________ Rush charge applied per set-up. Turnaround is 5 business days, plus shipping. (Rush does not apply to some custom designs, please contact Infinity Drain for details) *ABS Channel Support not...