Brochure "Made in Italy" from page 26 to 49
23Pages

{{requestButtons}}

Catalog excerpts

Brochure "Made in Italy" from page 26 to 49 - 1

Te MAX La Grande Tegola Max double ridge tile Max end ridge Code --30GR" Code --23GR" Code --20GR S Air vent Snow stop Code --71 " Half tile Code --50 Code --78 Left side rake Right side rake Capped three-way Code --73 Code --72 Code --44GR Code --45GR" Max four-way Code --41GR" Max front rake Code --40GR" Code --80GR" Chimneypot system Code --82 Code --62 Given the nature of the materials, sample and catalogue colours are approximate. Weights and measurements are subject to change. The codes for special pieces vary based on the colour of the product.

Open the catalog to page 1
Brochure "Made in Italy" from page 26 to 49 - 3

WkJ INOXWIND RIDGE SYSTEM To produce a well-ventilated roof it is vital to provide adequate hot air dispersal at the roof ridge. Up to now this has been very difficult to do without compromising waterproofing and also because the available ridge tiles were unattractive compared to the more classic mortar finishing. The INOXWIND ridge system solves both problems brilliantly: it provides excellent aeration of the under tile air space while keeping water out and at the same time is hidden under the ridge tile so the roof retains its traditional attractiveness. The INOXWIND ridge system...

Open the catalog to page 3
Brochure "Made in Italy" from page 26 to 49 - 4

VENTILATED RIDGES pg_29 INDUSTRIE H

Open the catalog to page 4
Brochure "Made in Italy" from page 26 to 49 - 5

JdJy 4 JOLLY POLYPROPYLENE "Jo\\y" is a system of po\ypropy\ene battens which are extremely rapid to instmount. The unique shape of th :a\\ and ne components provides a range of advantages which inc\ude exce\\ent aeration even around the base ti\es (faci\itated by the reduced ti\e contact points of the crad\e itse\f and improved interconnection of the under-ti\e air spaces); perfect a\ignment of the ti\es (the ti\es are more correct\y positioned by virtue of the crad\e p\acement pins and fixing screws); improved resistance to externa\ impact (thanks to the exceptiona\ rigidity of design...

Open the catalog to page 5
Brochure "Made in Italy" from page 26 to 49 - 7

TUIX This is a completely hidden system, which enables the tiles to be anchored on any deck angle and any surface, even if uneven, allowing for surfaces such as domes or spires to be covered. Damaged tiles can be replaced quickly and easily by hand as the base and cover tiles are fixed independently from one another. Additionally, old tiles can easily be re-used by pre-drilling them and using them as cover tiles. JOLLY METAL The use of pre-drilled galvanised aluminium battens makes the Jolly Metal system the ideal solution for obtaining excellent roof ventilation. The roof is highly compact...

Open the catalog to page 7
Brochure "Made in Italy" from page 26 to 49 - 8

VENTILATED ROOFS pg_33 _industrie_ cotto possagno 1>.^>2i^*ii--.~-Ti- Jim*TC lU^-***_____---

Open the catalog to page 8
Brochure "Made in Italy" from page 26 to 49 - 9

cudb FIXING-PANELS FOR BENT TILES SCUDO PANEL The patented, innovative modular SCUDO under-tile panel system provides a perfect base for quick, perfect tile installation, regardless of deck angle. At the same time it gives excellent ventilation of the tile air space as well as effective thermal insulation. VENTILATION AND FIXING The tiling is raised off the panel by 35 mm, creating an effective air flow throughout the tile air space which provides efficient heat dissipation during summer and enhances the removal of condensation during winter. Both bent tiles and roof tiles are anchored to...

Open the catalog to page 9
Brochure "Made in Italy" from page 26 to 49 - 10

VENTILATED AND INSULATED ROOFS pg_35

Open the catalog to page 10
Brochure "Made in Italy" from page 26 to 49 - 11

PAN.THER.A. Thermo-acustic Panel PAN.THER.A. is a panel System for bent tiles which provides thermal and acoustic insulation as well as waterproofing, ventilation and excellent anchoring for terracotta tiles. It is constructed from two materials, the upper part from EPS150 NEOpoR® (expanded polystyrene enriched with graphite), while the lower surface is made from mineralised wood fibre attached to Portland cement. EPS150 NEOPOR® provides excellent thermal insulation, while the lower surface which makes up the bulk of the panel, provides the enhanced acoustic insulation properties. The edge...

Open the catalog to page 11
Brochure "Made in Italy" from page 26 to 49 - 13

HOOKS AND ACCESSORIES Jolly Air breathable lining Code QI01 Variant PP Bird Stop Code QA37 Aluminium Start Tritop hooks Code TT03 TRITOP HOOK The Tritop hook is made from galvanised aluminium and is used to attach adjacent bent tiles thereby increasing installation speed and offering the opportunity to vary the distance between adjacent tiles both horizontally and vertically. They are used with pre-drilled cover bent tiles and enable quick and easy replacement of damaged tiles by hand. They cannot be used on continuous decks with angles over 40%, while with tapered bent tiles on battens,...

Open the catalog to page 13
Brochure "Made in Italy" from page 26 to 49 - 14

ROOF ANGLE TABLES pg_39 INDUSTRIE COTTO POSSAGNO X Results obtained in a sries of tests carried out using special equipment at Turin Polytechnic (see their report «In Laterizio» n. 5/87) demonstrate that a roof made of terracotta bent tiles provides a very high level of protection against rain even in very windy conditions, and is superior to all other types of discontinuous roof coverings. The deck angle to be used and the recommended overlap are shown in the tables below. As regards wind speed, reference was made to the Ministero dei Lavori Pubblici (Ministry of Public Works) which...

Open the catalog to page 14
Brochure "Made in Italy" from page 26 to 49 - 15

METHOD AND PRECAUTIONS TO BE TAKEN WHEN INSTALLING A TERRACOTTA TILED ROOF Recommendations regarding the correct installation of a terracotta tiled roof are detailed in the UNI 9460 directive (code of practice for the planning and installation of discontinuous coverings in terracotta tiles). TYPE OF SUPPORT Terracotta roof components (bent tiles and tiles) can be laid on one of the following bases: - Discontinuous Cement lime mortar battens (150 Kg of cement, 175-225 Kg of hydraulic lime to every cubic metre of dry sand), on a steel reinforced concrete roof. - Wooden battening fixed to a...

Open the catalog to page 15
Brochure "Made in Italy" from page 26 to 49 - 16

CERTIFICAIbS _industrie_ cotto possagno

Open the catalog to page 16
Brochure "Made in Italy" from page 26 to 49 - 17

ANTICA ASOLO Tavelle Antica Asolo: the incomparable fascination of terracotta comes to life with this new, distinguished yet warm line produced from the purest clay and by the skilled hands of the master craftsmen at Industrie Cotto Possagno. The Attic line rediscovers terracotta in its most rustic form: the classic rough finish of hand-crafted terracotta combined with timeless tonal colours make it ideal not only for the renovation of rural buildings but also to add a touch of rustic styling to any house. As sand is not used during the production process, Antica Asolo Attic Tiles have a...

Open the catalog to page 17

All INDUSTRIE COTTO POSSAGNO catalogs and technical brochures

  1. Te.Si

    2 Pages

  2. Coperture

    96 Pages

  3. Canova

    4 Pages

  4. Tiziano LR

    4 Pages

  5. OPERA

    3 Pages

  6. Te.Si.

    6 Pages

  7. Ma.Xi.Ma.

    6 Pages

  8. Winter

    16 Pages

Archived catalogs