GENERAL CATALOGUE GENERAL CATALOGUE COMPACT Clip The new Compact Wedge offers a new design, much more robust that its base for the system. The angled shape improves the grip to the clip and parts. Lastly, the base continues to be reinforced to prevent any damages to the tile. distributes the force more evenly, guaranteeing a better resistance of the predecessors. With a thickness of 22 mm, it provides a sturdier support Material: Polyamide with fibre COMPACT Bags LS Compact Wedge Leveling LS Compact Wedge Leveling REF. The new Compact Clip offers all the new functionalities of the LS Classic patented pre-cutting on the base continues ensuring that removal is easy, in a more reduced format. The new wide wedge guarantees the same and this, together with the more compact appearance, further facilitate tightening force and has a graded thickness in the head, so it can be used that step. as a wedge after it is removed, ensuring a new sustainability level. The

GENERAL CATALOGUE GENERAL CATALOGUE Classic Wedge - Ref: 03010200E - 100 units Polyamide with fibre The Classic Wedge fits into the Clip Classic with our pliers. Have saw- efficiency. The wedge base is round not to damage ceramics. Wedges can shaped teeth to be adjusted to the crosshead precisely and achieve top LS Classic Wedge Levelling - Ref: 03010140D - 80 units 1 mm The Clip LS Classic for stone are particularly designed for granite, stone mm, use it together with the special wedge-base to ensure tightening. Use and marble. Allow us to work between 16 and 30 mm. More resistant than the same...

GENERAL CATALOGUE GENERAL CATALOGUE LS Leveling System Kits Approximate amount Our installation kits include everything you need to complete small Kit 400 is intended for users that need to install a larger number of installation jobs. Kit 100 is particularly intended as a starter pack to use ceramic or stone metres. Which clip do you need? According to the tile thickness

GENERAL CATALOGUE GENERAL CATALOGUE Ergonomic Pliers The Peygran Ergonomic Pliers for Levelling System minimises the fatigue and with the arm axes. Peygran’s R & D department has designed this tool in The main characteristic is its scale bar for the floor tile thickness between 16 and 30 mm. Wedge-base is required for thickness between injuries caused by muscular overexertion during tiling and flooring works, close collaboration with a team of health and physiotherapy professionals, (patented system). The scale bar allows us to adjust the tool to the 3 and 5 mm and between 16 and 19 mm. The parts...

GENERAL CATALOGUE GENERAL CATALOGUE SLIM format STONE format 4 mm ceramic Wedge-bases have been made to extend the functionalities of our system support surface. Essential in cladding as they are very delicate pieces. allowing us to work with thicknesses from 3 to 5mm. Use it in thicknesses When using it on the tool scale bar, add 4 mm to the piece thickness. It is lower than 5 mm and in thicknesses from 16 to 20mm. Place the clips under compatible with all our models of wedges. the wedge, allowing the wedge to be centered and providing a larger Place the tile using the clip Ceramic clip Stone...

GENERAL CATALOGUE GENERAL CATALOGUE Levelling Bracket - Ref: 03010800A - 25 units Specially designed to protect the tiles (specially in the case of delicate eliminating the friction in the strength of the material and converting the It makes the tile installation easier and more precise when it comes to the spacious gaps to facilitate the clip placing. The thickness piece has been ceramics and fine thickness) when using the Peygran Leveling System. lateral force into vertical pressure, preventing the mortar from squeezing 90º angle in corners, projections, lintels, etc. In addition, the new Levelling...

GENERAL CATALOGUE GENERAL CATALOGUE If laying is not finished at the end of the working day and will be continued the following day: The Peygran Levelling System should be installed following the steps indicated below. It can be applied for all types of formats and surfaces. Follows the UNE - 138002 recommendations. Double gluing is recommended. Be sure to remove the fixing material or mortar on the last row of tiles by using the base of a clip to leave a small gap to allow you to insert the clip base the following day. The following day: fill the gaps left the day before with a trowel for edges...