Electric Operated Roller Shutters
1Pages

Electric Operated Roller Shutters Technical Specifications Roller Curtain The shutter curtain is constructed from cold rolled galvanised concave steel laths, (76mm), of suitable gauge to suit the application. Each lath is retained by a nylon, pressed steel or malleable iron end lock fixed with galvanised steel rivets. Cast Iron wind locks are fitted to help prevent the curtain being forced out of the guide during high winds, as and when required. Finish Side guides, support angles and door curtains come galvanised as standard. Powder Coated and Plastisol finish are available at additional cost. Bottom Rail A rigid inverted T section bottom rail, formed from either a cold rolled galvanised section, or mild steel angles, bolted back to back, depending on the width of the shutter. Specially designed tapered bottom rails can be supplied to suit sloping floors at additional cost. Perforated Laths Perforated Laths can be supplied at additional cost and are supplied galvanised as standard unless specified otherwise. Roller Barrel Constructed from mild steel tube of suitable outside diameter and wall thickness to suit the shutter application. Barrels are fitted in conjunction with an appropriate safety device i.e. Safedrive motor unit, safety bearing or counterbalance springs. Operation A variety of electric motors are used depending upon the required application. 415 volt 3 phase motors are normally used, however 240 volt single phase motors can be used in some circumstances. A push button station is provided with “UP”, “DOWN” and “STOP” buttons. Please contact us for full details of electrical specifications for your required operation and application. Coil Casing (Hoods) and Fascias Coil casings or fascias can be supplied at additional cost and are supplied galvanised as standard unless specified otherwise. Weight Approximately 35kg per M² Head Office Industrial Door Engineering Winnington Avenue Northwich Cheshire CW8 4EQ Web www.industrial-door-eng.co.uk Email sales@industrial-door-eng.co.uk Tel 01606 563045 Fax 01606 871482 Covering North and Mid Wales, The Midlands, The North West and