INCO 44.6 CURVED

Product catalog summary

Specifications:
The document outlines the specifications for corrugated steel profiles, including dimensions, coatings, and material properties. The profiles are available in galvanized steel Z-275 and pre-lacquered steel Z-225, with special coatings like high durability, Plastisol, and PVDF available upon request. The minimum radius for bending is 900 mm, and the yield strength is greater than 240 N/mm². The base material quality is S280GD with a tensile strength between 370 and 480 N/mm² and a modulus of elasticity of 210,000 N/mm². Minimum tensile elongation is 25%.

Applications:
These profiles are self-supporting and suitable for façades and roofing. They can be used with various trims such as corner, crowning, ridge, and saw-toothed trims, as well as canopies.

Thickness and Weight:
The document provides a table detailing the thickness, weight, inertia, and section modulus for different profile thicknesses ranging from 0.5 mm to 1 mm.

Colors:
Colors are available according to the Aceralia color chart, with RAL colors available upon consultation.

Perforated Sheets:
Perforated materials are available for acoustic reduction applications.

Load Tables:
The document includes load tables for different thicknesses and spans, with recommendations to consult the technical department for certain load conditions.

Standards and Calculations:
The profiles comply with Eurocode 3, NBE-EA-95, and DIN 18800 standards. Load combinations for ULE and ELS are specified, with maximum deflection limits. Calculations are verified by the Polytechnic University of Valencia.

Manufacturer's Note:
Ingeniería y Construcción del Perfil S.A. reserves the right to modify profile characteristics and is not responsible for non-compliance with recommendations.

Catalog excerpts

INGENIERiAY CONSTRUCTION DEL PERFIL CURVED PROFILE MECHANICAL PROPERTIES Self-supporting profile for fagade and roofing Corner trim Crowning trim Ridge trim Quality base material S280GD Minimum Tensile Lengthening 25% EFFECTIVE VALUES OF THE PROFILE Section Modulus ALTERNATIVES AND MANUFACTURING CONDITIONS Covering with Zinc: Galvanized steel Z-275 (275 gr/m2 both sides) Pre-lacquered steel Z-225 (225 gr/m2 both sides) Special coatings: High durability, Plastisol, PVDF. See finish chart. These coatings can be on both sides only upon The colours are in accord with Aceralia colour chart. The RAL is also available under Perforated sheet: Availability of perforated material for acoustic reduction applications

Open the catalog to page 1

INCO 44.6. Corrugated Curved Qq = Maximum load L= span lenght F= Rise H= Horizontal shear V= Vertical shear Radius= L2/8F + F/2 Minimum radius = 750 mm. Para las cargas que aparecen en gris claro se recomienda hablar con el Departamento Técnico. Eurocode 3: “Design of Structures-Part 1-3 : General Rules-Supplementary rules for cold formed thin gauge members and sheeting”. NBE-EA-95-Parte 4 Cálculo de las piezas de chapa conformadas. DIN 18800.”Structural Steelwork”.-Analysis of safety against buckling of linear members and frames”. Load Combinations: ULE:Total applied= 1,35*Permanent loads(including...

Open the catalog to page 2

INCO 44.6 CURVED

INCO 44.6 CURVED

Catalog excerpts

All INCOPERFIL catalogs and technical brochures