INCO 30.5 CURVED

Product catalog summary

Specifications:
- Yield strength: >240 N/mm²
- Quality base material: S280GD
- Tensile strength: 370-480 N/mm²
- Modulus of elasticity: 210,000 N/mm²
- Minimum tensile lengthening: 25%
- Colours: Available according to Aceralia colour chart and RAL upon consultation.

Materials and Coatings:
- Perforated sheet available for acoustic reduction applications.
- Galvanized steel Z-275 (275 gr/m² both sides).
- Pre-lacquered steel Z-225 (225 gr/m² both sides).
- Special coatings: High durability, Plastisol, PVDF, available on both sides upon request.

Dimensions and Mechanical Properties:
- Minimum radius: 375 mm.
- INCO 30.5.
- Curved roofing with supporting structure.

Applications:
- Aesthetic and design purposes only, not self-supporting.
- Requires a supporting structure.
- Includes corner trim, crowning trim, ridge trim, and canopies.

Warnings:
- The profile is not self-supporting and cannot support loads independently.
- Applications are limited to aesthetic and design purposes.
- Ingeniería y Construcción del Perfil S.A. reserves the right to modify characteristics and engineering details.
- Not responsible for non-compliance with recommendations for self-supporting curved profiles.

Contact Information:
- Ingeniería y Construcción del Perfil, S.A.
- Address: Carrer Nou, 16, Polígono Industrial Mas del Polio, 46469 Beniparrell (Valencia)
- Tel: 96 121 17 78
- Fax: 96 121 15 04

Catalog excerpts

INGENIERiAY CONSTRUCTION DEL PERFIL Curved roofing with supporting structure Corner trim Crowning trim Ridge trim Quality base material S280GD Minimum Tensile Lengthening 25% Thickness Weight Inertia Section Modulus Section Modulus fpositiuel fneqativel Covering with Zinc: Galvanized steel Z-275 (275 gr/m2 both sides) Pre-lacquered steel Z-225 (225 gr/m2 both sides) Special coatings: High durability, Plastisol, PVDF. See finish chart. These coatings can be on both sides only upon The colours are in accord with Aceralia colour chart. The RAL is also available under Perforated sheet: Availability of perforated material for acoustic reduction applications

Open the catalog to page 1

INCO 30.5. Curved LOAD TABLES WARNING This profile is not a self-supporting profile since it is not able to support the loads by itself so it needs a supporting structure. Its applications are restricted to aesthetic and design purposes. REMATE ESQUINA REMATE CORONACIÓN Ingeniería y Costrucción del Perfil S.A. reserves the right to carry out any general and/or particular modification in the characteristics and engineering details of its profiles, due to production requirements or technological improvement. Ingeniería y Costrucción del Perfil S.A. is not responsible for the failure to comply with...

Open the catalog to page 2

INCO 30.5 CURVED

INCO 30.5 CURVED

Catalog excerpts

All INCOPERFIL catalogs and technical brochures