PAINT FOR PVC WINDOWS AND DOORS

Product catalog summary

Product Overview: The document describes a premium paint designed for PVC windows and doors, offering direct adhesion on hard substrates without the need for a primer. It is UV stable, maintains a good appearance over time, and can be colored using the Advance HT tinting system. The paint has a semigloss finish with a gloss level between 45 and 60.

Features: This semigloss enamel is suitable for various surfaces including ABS, PVC, plexiglass, aluminum, and galvanized steel. It is applicable for both indoor and outdoor use.

Application Process: The application involves cleaning and degreasing the surface with Antisilicone or Quick Off, moistening the surface with Diluente PU, and applying two coats of the product with a 5-10 minute interval between coats. The recommended application method is using an air mix spray gun with a nozzle size of 1.2-1.5, achieving a dry film thickness of 30-40 microns with two coats.

Drying Time: The drying time varies based on the method: air drying at 20°C with 65% relative humidity takes 15-20 minutes for dust-free handling, 4-5 hours for handling, and 24-36 hours for complete drying. Oven drying at 60°C takes 50-60 minutes.

Mixing and Thinning: The mixing ratio is 100:20 by weight, and the product should be stirred thoroughly before adding the hardener. It should be thinned by 15% by weight using Diluente Extra PU code 1611.

Additional Information: The document also provides contact information for IMPA SpA, the manufacturer, located in San Pietro di Feletto, Treviso, Italy.

Catalog excerpts

Finitura ADPDUSTRY Semigloss enamel with direct adhesion CONTEMPORARY IDEAS INT FOR NDOWS D DOOF SURFACES FEATURES • direct adhesion on particularly hard substrates without primer • UV stable • good lasting appearance • it can be coloured with Advance HT tinting system • semigloss appearance (45^60 gloss)

Open the catalog to page 1

REFER TO THE TECHNICAL DATA SHEET Application cycle PRODUCT PREPARATION Stir thoroughly and add the hardener. To thin 15% by weight. Mixing ratio 100:20 by weight To thin with Diluente Extra PU code 1611 PVC, ABS, PC/ABS APPLICATION Clean and degrease with Antisilicone or Quick off. Code 1618 Antisilicone or code 0642 Quick Off. 2l Moisten the surface with a cloth soaked of Diluente PU code Code 1611 Diluente PU 1611 and wait until the surface become matt. ,3 Apply two coats of product waiting for 5-10 minutes between them. DRYING TIME IMPA SpA Via Crevada, 9/E 31020 • San Pietro di Feletto (Treviso),...

Open the catalog to page 2

All IMPA Contemporary ideas catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list