NATUR WOOD PLUS 0814
2Pages

NATUR WOOD PLUS 0814. transparent alkyd dispersion matt 1.02 kg/l ( + 0.02) 10 t 12 m2/l per one coat, according to the type of wood, porosity and absorption 24 months in original sealed container. Wooden surface must be dry, clean, free from oil or grease. It is recommended to apply two coats of NATUR WOOD PLUS, and to repeat the treatment every two years. Stir well to even colour and consistency. To reduce the shade intensity, it is possible to mix the coloured versions with colourless NATUR WOOD PLUS. - brush To get the maximum soaking effect it is recommended the dip application or flow-coating. product is ready-to-use. Dust free : 30 minutes Touch free : 60 minutes wait 3 hours between the two coats. Waxed water-based UV resistant impregnating 24/10/16 LRC/ib Description and use Waxed wood stain, matt, based on special resins dispersion with UV filters, able to protect wood from sunrays and weathering. The formulation with special additives makes the substrate water-repellent, avoiding water absorption, but maintaining natural perspiration, to keep wood shiny and pleasant for a long time. It is suitable for application both indoors and outdoors, on doors, windows, shutters, balconies, attics, gazebos, sheds, fences, beams, beads, etc., and on all wood structures exposed to weathering. It can be coloured using ADVANCE HT tinting system. Technical data Colour Binder After impregnating appearance Specific gravity Practical cover rate Storage life NB: Data recorded @ 20°C (68°F). The product is compliant with Directive 2004/42/CE-IIA(f) maximum VOC limit value: 130 g/l (2010). Application note Substrate preparation Product preparation Application method IMPA Spa - Via Crevada 9/E - 31020 San Pietro di Feletto (TV) Italy - tel. +39 0438 4548 - fax 0438 454915 - www.impa.it - info@impa.it

NATUR WOOD PLUS Waxed water-based UV resistant impregnating 24/10/16 NOTE: Wood substrate should have maximum humidity of 15%. Do not apply in foggy or rainy weather, or when the relative humidity exceeds 75%. Surface and ambient temperature must be above + 5 (41°F) and below 35°C (95°F). Exterior applications need to be protected from rain for at least 24 hours and in any case until complete drying. BEWARE OF FROST. Store the product between + 5 (41°F) and 35°C (95°F). Information provided in this technical data sheet is based upon our best experience and technical knowledge; it does not...