NATUR WOOD 0869.Water-based UV resistant impregnating 24/10/16 LRC/ib Description and use NATUR WOOD is a water based protective for wood, matt, based on special resins dispersion with UV filters, able to protect wood from sunrays and weathering. It is perfect both as finishing and as brightening, on wood surfaces which has been already treated, both indoors and outdoors, on fixtures, beams, balconies, doors and windows etc. It can be coloured using ADVANCE HT tinting system. It is available in colourless version or coloured with transparent pigments which make visible and highlight the wood grain. The product can be coloured using ADVANCE HT tinting system. Colour Binder Appearance after impregnating Specific gravity Practical coverage Storage life Technical data see colour card alkyd dispersion matt 1.02 kg/l ( + 0.02) 10 t 12 m2/l per one coat, according to the type of wood, the porosity and the absorption grade. 24 months in original sealed container. NB: Data recorded @ 20°C.(68°F.) The product is compliant with Directive 2004/42/CE-IIA(f) maximum VOC limit value: 130 g/l (2010). Application note Substrate preparation Product preparation Application method Reduction Air drying @ 20°C. Recoatable Wooden surface must be dry, clean, free from oil or grease. It is recommended to apply two coats of NATUR WOOD and repeat the treatment every two years. Stir well to even colour and consistency. To reduce the shade intensity, it is possible to mix the coloured versions with colourless NATUR WOOD. - brush To get the maximum soaking effect it is recommended the dip application or flow-coating. Product is ready-to-use. Dust free : 30 minutes wait 3 hours between coats NOTE: The wood must have maximum 15% humidity. Do not apply in foggy or rainy weather, or when the relative humidity exceeds 75%. IMPA Spa - Via Crevada 9/E - 31020 San Pietro di Feletto (TV) Italy - tel. +39 0438 4548 - fax 0438 454915 - www.impa.it - [email protected]

NATUR WOOD Water-based UV resistant impregnating 24/10/16 Surface and ambient temperature must be above + 5 (41°F) and below 35°C (95°F). Exterior applications need to be protected from rain for at least 24 hours, and in any case until complete drying. BEWARE OF FROST. Store the product between + 5 (41°F) and 35°C (95°F). + 5 and 35°C. Information provided in this technical data sheet is based upon our best experience and technical knowledge; it does not absolve the users from carrying out tests and preventive checks in order to verify the suitability for use. For further technical information...