ALBA
2Pages

Washable acrylic wall paint, resistant to algae and mould growth advarc EE mreu8 Description and use ALBA is an emulsion paint for interior and exterior use, containing sanitizing compounds, pigments and selected extenders which provide easy applicability, high hiding power and good alkali resistance; it becomes completely washable starting 8 -+ 10 days after application. You may use it as a primer, before applying a decorative paint from the ORIZZONTI series. Suitable substrates: lime-based plasters, mortar of cement and cement products in general, as well as on gypsum and plasterboard properly treated. The product can be coloured using the ADVANCE HT tinting system. Technical data Colour Binder Specific gravity Viscosity Resistance to washing Classification UNI EN 13300:2002 white acrylic dispersion 1.56 kg/l ( + 0.02) 10000 + 14000 mPa.s Brookfield RVT rpm 20 s 6 excellent (UNI 10795) >20000 Gardner cycles (UNI 10560) Wet-scrub resistance: Class 2 (ISO 11998:2006) Hiding power: Class 2 at a spreading rate of Practical cover rate* : 6 -+ 7 m2/l per two layers. Storage life : 24 months in original sealed container. *The cover rate can change depending on the surface roughness and absorption, and according to the application method. NB: Data recorded @ 20°C (68°F) The product is compliant with Directive 2004/42/CE-IIA(a) maximum VOC limit value: 30 g/l (2010) Contains a preservative to control fungal and algal growth: 2-octyl-2H-isothiazol-3-one - pyrithione zinc - terbutryne Application note Substrate preparation : The underlying surface must be seasoned, non chalking and clean (no grease, oil or other polluting agents). Wherever there are damaged surfaces, remove any efflorescence and non-adhering old paints. In case of mould or algae growth, carry out a treatment with DECISO code 0610, wash the wall and, when it is completely dry, apply RENOVO code 0600. On plaster, level any unevenness with IMPA RAS code 0542, and allow the treated areas to rest. Indoors, fill and rub down holes, cracks and crackles with IMPASTUK UNIVERSAL EXTRA code 0401, or IMPASTUK POLVERE code 0410 or IMPASTUK POLVERE EXTRA code 0418. MPA Spa - Via Crevada 9/E - 31020 San Pietro di Feletto (TV) Italy - tel.+39 0438 4548 - fax 0438 454915 - www.impa.it - info@impa.it

Washable acrylic wall paint, resistant to algae and mould growth 30/06/14 LRC/nz Product preparation Application method Dilution by weight Dilution by volume Recoatable On new, powdery or highly absorbing plaster, on fillings or old flaking paints apply one layer of masonry fixative to make uniform the substrate absorption. Indoors, use the water-reducible products POLY VA code 0003 or POLY ACRYL code 0004, otherwise SUPERFIX code 0010 or GREY FIX code 0011, properly reduced; outdoors, use the solvent-type ready-to-use CLIM-O-PAINT PRO code 1004, otherwise SUPERFIX or GREY FIX. Once dried,...