PLASTUK DEEP Polyester filler paste for wood 07/06/13 Description and use Two-component product based on unsaturated polyester resins. It is suitable for applying on wooden surfaces to reconstruct missing parts, even large areas, an also suitable for filling, joinery applications, etc. Hardens quickly with the addition of a special catalyst; after hardening, it can be subjected to the same treatment as wood, and can be repainted with most of the enamels and stains available on the market. It has a deep black colour, which remains even after sanding. This colour can be enhanced by applying a layer of clear finish; this makes PLASTUK DEEP particularly suitable for using on dark wood to obtain a beautiful finish. Technical data Colour Specific gravity∗∗ Hardener Curing ratio Complete polymerisation∗∗ Sandability∗∗ Storage life∗∗ ∗∗ Data recorded @ 20°C (68°F.) black part “A”: 1.70 kg/l ( ± 0.03) paste code 40001015 (tube), code 40011015 (cartridge). 100 parts of “A” + 2 ÷ 3 of “B” by weight with tube; DIDOC apparatus: fixed position. 5 ÷ 7 minutes with 3 parts by weight of hardener code 40011015 to 100 parts of “A”. after 2 hours after 45 minutes on medium thickness 12 months in original sealed container, away from light. Application note Types of surface Woods of every type provided they are treated as suggested in the following “Surface preparation”. For any further information, apply to our TECHNICAL SERVICE. Surface preparation Surface must be dry, free of dust, earth, fouling, rot, aged paints and wax. Wood must be compact with high mechanical resistance and with humidity within 8% and 15%. “Hairy” surfaces (wood fibers perpendicularly cut) have to be well imbued with a primer in order to strengthen the mass. Cerous essences such as exotic wood, birch tree, or oily as olive tree, tek or with a high content of natural resins as fir, larch, pine, and other coniferae must be well cleaned with a proper solvent and, besides, they have to be insulated with a special primer. Palisander (rosewood), oak, chestnut tree an others that contain substances which make difficult the adhesion, or soaked ancient woods of coal-tar, linseed oil, smokes, etc. must be treated anyhow with one or more coats of a primer surfacer (insulating). IMPA Spa - Via Crevada 9/E - 31020 San Pietro di Feletto (TV) Italy - tel. +39 0438 4548 - fax 04

PLASTUK DEEP Polyester filler paste for wood 07/06/13 LRD/nz In case of surfaces old and particularly difficult to be cleaned, it is suggested a sand-blasting followed by an impregnating-insulating treatment. The wood treated with insecticides and phenol-based compounds must be carefully insulated with one or more coats of primer, and the adhesion of filler paste has to be carefully evaluated. Application method spatula (blade) Product preparation The use of the product in cartridge combined with DIDOC device allows the correct dosage of the two components. Using the product in tin can, add the...